a2A2590-60umPRO

SPECIFICATIONS

Model	a2A2590-60umPRO
Part Number	108129
Product Family	ace 2 PRO
Interface	USB 3.0
Image Sensor	Sony IMX334ROI
COLOR or Monochrome	Monochrome
Optics Format	1/2.8 inch
Lens Mount	C-mount
Horizontal Pixels	2592
Vertical Pixels	1944
Total Pixels	5 MegaPixels
Frame Rate	60 fps
Electronic Shutter	Rolling
Pixel Size	2 µm
Pixel Depth	8/10/12 bits
Frame Synchronization	Free-run Hardware trigger Software trigger
Exposure Control	Programmable via the camera API Hardware trigger
Pixel Formats	Mono 8 Mono 10 Mono 10p Mono 12 Mono 12p
Digital Inputs	1
General Purpose I/O (GPIO)	2
Power Input	Via USB 3.0 interface or 12-24 VDC
Power Consumption	3.0 Watts
Dimensions	42.8 mm x 29 mm x 29 mm
Operating Temperature	0 to 50°C
Mass	90g
Standards Compliance	RoHS, CE, IP30, FCC, UL (in preparation), GenICam, USB3 Vision, KC, EAC

EMVA DATA

EMVA Peak Quantum Efficiency (typical)	72.3 %
Dark Noise	2.0 electrons
Saturation Capacity	7,400 electrons
Dynamic Range	69.3 dB
Signal-to-Noise Ratio	38.7 dB

Beyond Features	Compression Beyond Pixel Beyond
Chunks	Auto Brightness Status CRC Checksum Counter Value Exposure Time Frame ID Gain Line Status All Timestamp
Color Creation and Enhancement	Brightness Contrast Enhancement
Event Reporting	Action Late Exposure End Frame Buffer Overrun Frame Start Frame Trigger Missed Overrun Temperature Status Changed Test
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Exposure Active Frame Trigger Wait Input Filter Serial Communication (UART) Timer Active User Output
Image Acquisition Control	Acquisition Abort Acquisition Single Frame Acquisition Start Acquisition Status Acquisition Stop Frame Burst Start Trigger Frame Start Trigger High Speed Burst Mode Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Device Temperature User Defined Values User Sets (Configuration Sets)
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 10 Mono 10p (Mono 10 Packed) Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Standard Features	12Bit Lookup Table (LUT) Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Exposure Mode: Trigger Width (Control via External Trigger) Exposure Time Gain Gain Auto Gamma Correction Multiple ROI Region of Interest (ROI) Test Patterns

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	5.184 mm
	Vertical PhotoActive Area (PAA v)	3.888 mm
	Diagonal PhotoActive Area (PAA diag)	6.480 mm
	Image Sensor Resolution	250 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	24 VDC camera power
2	Line 1	Opto-coupled I/O input line
3	–	Ground for opto-coupled I/O lines
4	Line 2	General purpose I/O (GPIO) line
5	Line 3	General purpose I/O (GPIO) line
6	–	Ground for camera power and General Purpose I/O (GPIO) lines