a2A2590-22gcBAS

SONY Pregius 5 MegaPixel Color Image Sensor

  • 1/2.5 inch Optical Format
  • 22 frames.sec
  • Rolling Electronic Shutter
  • Convenient & Robust M8 I/O Connector

$ 319.00

SPECIFICATIONS

Model a2A2590-22gcBAS
Part Number 108031
Product Family ace 2 Basic
Interface GigE
Image Sensor Sony IMX334ROI
COLOR or Monochrome Color
Optics Format 1/2.3 inch
Lens Mount C-mount
Horizontal Pixels 2592
Vertical Pixels 1944
Total Pixels 2.3 MegaPixels
Frame Rate 22 fps
Electronic Shutter Rolling
Pixel Size 2 µm
Pixel Depth 8/10/12 bits
Pixel Formats Free-run
Hardware trigger
Software trigger
Frame Synchronization Programmable via the camera API
Hardware trigger
Exposure Control Mono 8
Mono 12
Mono 12p
Bayer RG 8
Bayer RG 12
Bayer RG 12p
RGB 8
BGR 8
YCbCr422_8
Digital Inputs 1
General Purpose I/O (GPIO) 2
Power Input PoE or 12-24 VDC
Power Consumption 3.0 Watts
Dimensions 55.5 mm x 29 mm x 29 mm
Operating Temperature -10 C to 60 C
Mass 100g
Standards Compliance RoHS, CE, IP30, GigE Vision 2.0, FCC, GenICam, EAC, UL

EMVA DATA

EMVA Quantum Efficiency (typical) 72.6 %
Dark Noise 2.0 electrons
Saturation Capacity 7,600 electrons
Dynamic Range 38.8 dB
Signal-to-Noise Ratio –

FEATURES

Chunks
  • Auto Brightness Status
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Frame ID
  • Gain
  • Line Status All
  • Timestamp
Color Creation and Enhancement
  • Balance White (Manual White Balance)
  • Balance White Auto (Automatic White Balance) (coming soon)
  • Brightness
  • Color Adjustment (6-axis Hue/Saturation)
  • Color Transformation (RGB to RGB)
  • Contrast Enhancement
  • Hue/Saturation
  • Light Source Presets
  • sRGB Gamma Correction
Event Reporting
  • Action Late
  • Exposure End
  • Frame Buffer Overrun
  • Frame Start
  • Frame Trigger Missed
  • Overrun
  • Temperature Status Changed
  • Test
GigE Vision 2.0
  • Action Commands (Synchronous Triggering)
  • Precision Time Protocol (IEEE 1588)
  • Scheduled Action Commands
I/O Control and Line Source Signals
  • Acquisition Trigger Wait / Frame Burst Trigger Wait
  • Exposure Active
  • Frame Trigger Wait
  • Input Filter
  • Serial Communication (UART) (coming soon)
  • Timer Active
  • User Output
Image Acquisition Control
  • Acquisition Abort
  • Acquisition Single Frame
  • Acquisition Start
  • Acquisition Status
  • Acquisition Stop
  • Frame Burst Start Trigger
  • Frame Start Trigger
  • High Speed Burst Mode
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • User Defined Values
  • User Sets (Configuration Sets)
Pixel Formats
  • Bayer 10 (coming soon)
  • Bayer 10p (Bayer 10 Packed) (coming soon)
  • Bayer 12
  • Bayer 12p (Bayer 12 Packed)
  • Bayer 8
  • Mono 10 (coming soon)
  • Mono 10p (Mono 10 Packed) (coming soon)
  • Mono 12
  • Mono 12p (Mono 12 Packed)
  • Mono 8
  • RGB 8
  • YCbCr422_8 (YUV422_8)
Standard Features
  • 12Bit Lookup Table (LUT)
  • Auto Function Profile
  • Black Level
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed (Control via API)
  • Exposure Mode: Trigger Width (Control via External Trigger)
  • Exposure Time
  • Gain
  • Gain Auto
  • Gamma Correction
  • Multiple ROI
  • Region of Interest (ROI)
  • Test Patterns

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 5.184 mm
Vertical PhotoActive Area (PAA v) 3.888 mm
Diagonal PhotoActive Area (PAA diag) 6.480 mm
Image Sensor Resolution 250 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 55.5 mm x 29 mm x 29 mm
Mass 100g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – 12 VDC camera power
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for camera power and General Purpose I/O (GPIO) lines
Basler ace 2 GigE

 

Basler Ace2 GigE Mechanical Drawing (192 KB)
Shopping Cart
Scroll to Top