a2A1920-160umBAS

SPECIFICATIONS

Model	a2A1920-160umBAS
Part Number	107820
Product Family	ace 2 Basic
Interface	USB 3.0
Image Sensor	Sony IMX392
COLOR or Monochrome	Monochrome
Optics Format	1/2.3 inch
Lens Mount	C-mount
Horizontal Pixels	1920
Vertical Pixels	1200
Total Pixels	2.3 MPixel
Frame Rate	160 fps
Electronic Shutter	Global
Pixel Size	3.45 µm
Pixel Depth	8/10/12 bits
Frame Synchronization	Free-run Hardware trigger Software trigger
Exposure Control	Programmable via the camera API Hardware trigger
Pixel Formats	Mono 8 Mono 12 Mono 12p
Digital Inputs	1
General Purpose I/O (GPIO)	2
Power Input	Via USB 3.0 interface
Power Consumption	3.6 Watts
Dimensions	42.8 mm x 29 mm x 29 mm
Operating Temperature	-10 C to 60 C
Mass	85g
Standards Compliance	RoHS, CE, IP30, FCC, GenICam, USB3 Vision, KC, EAC, UL

EMVA DATA

EMVA Quantum Efficiency (typical)	62.2 %
Dark Noise	2.5 electrons
Saturation Capacity	10,400 electrons
Dynamic Range	71.7 dB
Signal-to-Noise Ratio	40.2 dB

Chunks	Auto Brightness Status CRC Checksum Counter Value Exposure Time Frame ID Gain Line Status All Timestamp
Color Creation and Enhancement	Brightness Contrast Enhancement
Event Reporting	Action Late Exposure End Frame Buffer Overrun Frame Start Frame Trigger Missed Overrun Temperature Status Changed Test
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Exposure Active Frame Trigger Wait Input Filter Serial Communication (UART) (coming soon) Timer Active User Output
Image Acquisition Control	Acquisition Abort Acquisition Single Frame Acquisition Start Acquisition Status Acquisition Stop Frame Burst Start Trigger Frame Start Trigger High Speed Burst Mode Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Device Temperature User Defined Values User Sets (Configuration Sets)
Pixel Formats	Mono 10 (coming soon) Mono 10p (Mono 10 Packed) (coming soon) Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Standard Features	12Bit Lookup Table (LUT) Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Exposure Mode: Trigger Width (Control via External Trigger) Exposure Time Gain Gain Auto Gamma Correction Multiple ROI Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Test Patterns Ultra Short Exposure Time Mode

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	6.624 mm
	Vertical PhotoActive Area (PAA v)	4.140 mm
	Diagonal PhotoActive Area (PAA diag)	7.8111 mm
	Image Sensor Resolution	145 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	Reserved. Do Not Connect.
2	Line 1	Opto-coupled I/O input line
3	–	Ground for opto-coupled I/O lines
4	Line 2	General purpose I/O (GPIO) line
5	Line 3	General purpose I/O (GPIO) line
6	–	Ground for General Purpose I/O (GPIO) lines