TR Series – Rochester Imaging Technology Corporation

TR Series
triniti LED Strobe Controllers

Key features:

1, 2 and 4 channel LED lighting controllers
Compatible with triniti Intelligent Lighting platform
GigE Vision compliant
Pulsing up to 20A
Continuous output to 3.0A
30W maximum output per channel
Pulse timing to 20µs
Ethernet and Push-button interfaces (dependent on model.)

Trinity Application Benefits:

Enables non-expert users to use expert Machine Vision lighting techniques
Revolutionises the integration of lighting parameters right through to application level software
Addresses the industry’s need for a flexible system that is readily ‘plug & play’
Provides a stability of brightness, long-term, that helps to enhance the reliability of Vision systems, over many years.

SPECIFICATIONS

OVERVIEW

SPECIFICATIONS


	TR-RC120	TR-RC122	TR-RT220(F)-20 TR-RT220(F)-2	TR-RT420(F)-20 TR-RT420(F)-2
User interface	Ethernet and Push-Button Display		Ethernet
Output Channels	One constant current output		Two independent constant current outputs	Four independent constant current outputs
Output Current	Up to 1.0A continuous or 1.0A pulsed	Up to 1.2A continuous or 2.0A pulsed
Output Power	Maximum 25 Watts	Maximum 30 Watts	Maximum 40 Watts per unit	Maximum 50 Watts per unit
Trigger Inputs	One Smart input compatible with 3V-24V, TTL, NPN, and PNP. Input impedance (nom): 8 Kohm		Two opto-isolated digital inputs Require 3V-24V operation	Four opto-isolated digital inputs Require 3V-24V operation
Pulse Timing (Standard Versions)	STANDARD VERSIONS
Pulse Timing and Delay from Trigger to Pulse	Pulse 100µs to 100ms. Delay 2µs to 100ms For delay + pulse up to 900µs: steps of 100µs, repeatability 1µs For delay + pulse 900µs to 100ms: steps of 100µs, repeatability 100µs		Pulse 1µs to 1s. Delay 4µs to 1s For delay + pulse up to 900µs: steps of 1µs, repeatability 1µs For delay + pulse 900µs to 40ms: steps of 6µs, repeatability 6µs For delay + pulse > 40ms: steps of 100µs, repeatability 100µs
Switch Mode Latency	Maximum 100µs		Maximum 20µs
Pulse Timing (F Versions)	“F” VERSIONS
Pulse Timing and Delay from Trigger to Pulse	n/a		Pulse 1µs to 1s. Delay 4µs to 1s For delay + pulse up to 900µs: steps of 1µs, repeatability 1µs For delay + pulse 900µs to 40ms: steps of 6µs, repeatability 6µs For delay + pulse > 40ms: steps of 100µs, repeatability 100µs
Switch Mode Latency	n/a		Maximum 4µs
Trigger Rate	Maximum 100 Hz		Maximum 1 KHz
Output Voltage	Up to 32V, continuous or pulsed	Up to 32V continuous, up to 48V pulsed	0V to 46V
Trinity Interface	Gardasoft 4-wire Triniti lighting interface
Trinity Communications Interface	GigE Vision V2.0, GenICam, UDP/TCP, Third party protocols
Supply Voltage	Regulated 24V ±10%: A SELV power supply is required		Regulated 24V to 48V. A SELV power supply is required.
Dimensions	1101mm long x 35mm wide x 120mm high	101mm long x 60mm wide x 120mm high	112mm long x 97mm wide x 62mm high	159mm long x 97mm wide x 62mm high
Weight	175g	340g	300g	400g
Mounting	DIN Rail Mount Standard		Panel mounting. DIN rail option
Operating Temperature	-20°C to 50°C
Operating Humidity	Up to 95% non-condensing
Standards Compliance	CE, RoHS

OVERVIEW

TR Seriestriniti LED Strobe Controllers

Key features:

1, 2 and 4 channel LED lighting controllers

Compatible with triniti Intelligent Lighting platform

GigE Vision compliant

Pulsing up to 20A

Continuous output to 3.0A

30W maximum output per channel

Pulse timing to 20µs

Ethernet and Push-button interfaces (dependent on model.)

Trinity Application Benefits:

Enables non-expert users to use expert Machine Vision lighting techniques

Revolutionises the integration of lighting parameters right through to application level software

Addresses the industry’s need for a flexible system that is readily ‘plug & play’

Provides a stability of brightness, long-term, that helps to enhance the reliability of Vision systems, over many years.

TR-RC120

TR-RC122

TR-RT220(F)-20TR-RT220(F)-2

TR-RT420(F)-20

TR-RT420(F)-2

User interface

Ethernet and Push-Button Display

Ethernet

Output Channels

One constant current output

Two independent

constant current outputs

Four independent

constant current outputs

Output Current

Up to 1.0A continuous or 1.0A pulsed

Up to 1.2A continuous or 2.0A pulsed

Output Power

Maximum 25 Watts

Maximum 30 Watts

Maximum 40 Watts per unit

Maximum 50 Watts per unit

Trigger Inputs

One Smart input compatible with 3V-24V, TTL, NPN, and PNP.

Input impedance (nom): 8 Kohm

Two opto-isolated digital inputsRequire 3V-24V operation

Four opto-isolated digital inputsRequire 3V-24V operation

Pulse Timing (Standard Versions)

Pulse Timing and Delay from Trigger to Pulse

Pulse 100µs to 100ms. Delay 2µs to 100msFor delay + pulse up to 900µs: steps of 100µs, repeatability 1µsFor delay + pulse 900µs to 100ms: steps of 100µs, repeatability 100µs

Pulse 1µs to 1s. Delay 4µs to 1s

For delay + pulse up to 900µs: steps of 1µs, repeatability 1µs

For delay + pulse 900µs to 40ms: steps of 6µs, repeatability 6µs

For delay + pulse > 40ms: steps of 100µs, repeatability 100µs

Switch Mode Latency

Maximum 100µs

Maximum 20µs

Pulse Timing (F Versions)

“F” VERSIONS

Pulse Timing and Delay from Trigger to Pulse

n/a

Pulse 1µs to 1s. Delay 4µs to 1sFor delay + pulse up to 900µs: steps of 1µs, repeatability 1µsFor delay + pulse 900µs to 40ms: steps of 6µs, repeatability 6µsFor delay + pulse > 40ms: steps of 100µs, repeatability 100µs

Switch Mode Latency

n/a

Maximum 4µs

Trigger Rate

Maximum 100 Hz

Maximum 1 KHz

Output Voltage

Up to 32V, continuous or pulsed

Up to 32V continuous, up to 48V pulsed

0V to 46V

Trinity Interface

Gardasoft 4-wire Triniti lighting interface

Trinity Communications Interface

GigE Vision V2.0, GenICam, UDP/TCP, Third party protocols

Supply Voltage

Regulated 24V ±10%: A SELV power supply is required

Regulated 24V to 48V. A SELV power supply is required.

Dimensions

1101mm long x 35mm wide x 120mm high

101mm long x 60mm wide x 120mm high

112mm long x 97mm wide x 62mm high

159mm long x 97mm wide x 62mm high

Weight

TR Series
triniti LED Strobe Controllers

TR-RT220(F)-20
TR-RT220(F)-2

Two opto-isolated digital inputs
Require 3V-24V operation

Four opto-isolated digital inputs
Require 3V-24V operation

Pulse Timing and Delay
from Trigger to Pulse

Pulse 100µs to 100ms. Delay 2µs to 100ms
For delay + pulse up to 900µs: steps of 100µs, repeatability 1µs
For delay + pulse 900µs to 100ms: steps of 100µs, repeatability 100µs

Pulse Timing and Delay
from Trigger to Pulse

Pulse 1µs to 1s. Delay 4µs to 1s
For delay + pulse up to 900µs: steps of 1µs, repeatability 1µs
For delay + pulse 900µs to 40ms: steps of 6µs, repeatability 6µs
For delay + pulse > 40ms: steps of 100µs, repeatability 100µs