RT200 Series
2-Channel LED Strobe Controllers
Key features:
- Compatible with nearly any LED lighting assembly available today
- Two independently controlled output channels
- Push button, Ethernet or RS232 configuration options
- SafeSense™ technology for safe overdriving
- SafePower™ for easy installation
- Small compact unit with optional DIN mounting available
| RT200-20 | RT220-20 | RT260-20 | RT200F-20 | RT220F-20 | RT260F-20 | |
|---|---|---|---|---|---|---|
| User interface | Pushbutton | Ethernet | RS232 | Pushbutton | Ethernet | RS232 |
| Output channels | Two independent constant current outputs with SafeSense™ | |||||
| Output current | From 0mA to 20A in steps of 5mA. Up to 3A per channel continuous or 20A pulsed | |||||
| Output Power | Max 30 W per channel | |||||
| Trigger inputs | 2 opto-isolated digital inputs. Require 3v to 24v operation | |||||
| Timing | From 20µs to 999 ms in steps of 20µs/100µs | From 1µS to 999 ms in steps of 1µs/100µs | ||||
| Delay from trigger to pulse | From 20µs to 999 ms in steps of 20µs/100µs | From 3µS to 999 ms in steps of 1µs/100µs | ||||
| Timing repeatability | Delay + Pulse up to 10ms: 0.1µS for pulse width and 2µS for delay. Otherwise 100µS | |||||
| Output voltage | 0V to 46V | |||||
| Supply voltage | Regulated 24V to 48V | |||||
| Dimensions | 112mm long by 97mm wide by 62mm high (excluding DIN fixing) | |||||
| Weight | 300g | |||||
| Mounting | Panel mounting. DIN rail mount option | |||||
The RT Series is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing their patented SafePower™ technology, installation is simple, without the need of having to use a custom DC power supply or heat sinking the controller. All RT models also include their SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled.
Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The ‘F’ version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger.
The RT220 / RT260 models can be quickly configured using our free software (which can be downloaded from this page), or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected.
Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage (which you need to do with the Gardasoft PP range), making implementation and system integration much simpler). Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. The Gardasoft White Paper on LED Controller technology is a useful reference for the principles of attaining maximum performance for Machine Vision illumination.