ICS 3.0 ICS 3.1
ICS 3 and 3S Inline Controllers
The Inline Current Source (iCS 3) provides steady and optimal current to lights from a small package when a larger, more flexible external controller is not necessary.
Switching between continuous-on, gating on/off and strobe overdrive is seamless. The iCS 3 and iCS 3S employ Ai’s exclusive Adaptive Overdrive that optimizes strobe power regardless of input Pulse Width.
The iCS 3 is a default-on device on power-up, whereas the iCS 3S is a default-off device, requiring a trigger to illuminate.
| Modes | Pulsed, Continuous, Gated Continuous |
| Input Voltage Range | 24V nom. |
| Input Voltage Range | 1.5A DC |
| Output Power | Continuous: 35W, 1.5A Strobe: 5x Overdrive Typical |
| User Interface | 5 Tinned Wire Leads: OR optional 5-pin mail M12 cordset |
| Trigger | Single PNP – active HIGH trigger input, TTL compatible |
| IP Rating | IP50 |
| Max Frequency | 10 KHz – User must limit duty cycle to ≤5% beyond 1 KHz |
| Trigger Latency | 60 μsec typical |
| Maximum Operating Temperatures | Ambient: 90°F |
ICS 3.0, ICS 3S Mechanical Drawing
