DCS-103E
DCS Series Triple Output Controller
This DCS-103E provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package.
Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs.
3 independent output channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.
| Number of Output Channels | 3 |
| INPUT VOLTAGE RANGE | 24V nom. (min 12 / max 30) |
| MAXIMUM INPUT CURRENT | 4.5 A |
| OUTPUT POWER | 30 Watts per Channel |
| MODES | Pulsed, Continuous, Gated Continuous |
| TRIGGER TO PULSE LATENCY | 10 μs |
| TRIGGER | 5-30VDC, 2KHz, Opto-Isolated Inputs |
| PULSE WIDTH RANGE | 10 μs – 65 msec |
| PROGRAMMABLE PULSE DELAY | 1 μs to 10 msec |
| DUTY CYCLE | 10% pulsed / >10% Gated Continuous |
| OPERATING TEMPERATURE | -25°C to 57°C |
| MASS | 278g (9.8 oz) |
| STANDARDS COMPLIANCE | CE, RoHS, IEC 62471 |
DCS-103E Series Mechanical Drawing
Multi-light stations are currently limited to the following group of identical light heads.
A future development will allow the Quad Controllers to drive up to eight different configured lights simultaneously.
DF198 – Dark Field Ring Light
DF241 – Small Low Angle Dark Field Ring Light
DF242 – Large Low Angle Dark Field Ring Light
LL174 – High Intensity Bar Light
AL295 – MicroBrite™ Bar Light
AL116 – High Dispersion Wide Bar Light
AL126 – High Dispersion Narrow Bar Light
LL232 – MicroBrite™ Line Light
SL243 – MicroBrite™ Small Spot Light
SL244 – MicroBrite™ Spot Light
Note: due to power output constraints, some configurable light lengths may be limited.
SPECIFICATION SHEET
CAD FILES
DRAWINGS
MANUALS
SOFTWARE
- DCS-103E Graphical User Interface (ZIP)
- DCS-103E Software Development Kit (ZIP)
- DCS-103E REV A Firmware Update (ZIP)
- DCS-103E REV – Firmware Update (ZIP)