DCS-100E
Single Output Controller
This DCS Series Controller provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package.
Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs.
1 output, 3 channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.
Model Number | DCS-100E |
User Interface | Software GUI, Web Browser |
Output Channels | Number of Outputs: 1Number of Channels per Output: 3 |
Input Supply Requirements | 24V DC Nominal, 4.5A Recommended |
Light Head Connection | Via B-coded 5-pin Male M12 with Embedded EEPROM on Light Head Cable (C1) |
Output Power | Continuous: 90W Max Total, 30W per Channel*655543er |
Operating Modes | PULSED, CONTINUOUS, GATED CONTINUOUS |
TRIGGER TO PULSE LATENCY | 10 μs |
Trigger Input Signal | 5V Min – 30V Max, <=5mA |
PULSE WIDTH RANGE | 10 μs – 65 msec |
PROGRAMMABLE PULSE DELAY | 1 μs to 10 msec |
DUTY CYCLE | 10% pulsed / >10% Gated Continuous |
OPERATING TEMPERATURE | -25°C to 57°C |
MASS | 192g (6.77oz) |
STANDARDS COMPLIANCE | CE, RoHS, IEC 62471 |
DCS-100E Series Mechanical Drawing
Multi-light stations are currently limited to the following group of identical light heads.
A future development will allow the Quad Controllers to drive up to eight different configured lights simultaneously.
DF198 – Dark Field Ring Light
DF241 – Small Low Angle Dark Field Ring Light
DF242 – Large Low Angle Dark Field Ring Light
LL174 – High Intensity Bar Light
AL295 – MicroBrite™ Bar Light
AL116 – High Dispersion Wide Bar Light
AL126 – High Dispersion Narrow Bar Light
LL232 – MicroBrite™ Line Light
SL243 – MicroBrite™ Small Spot Light
SL244 – MicroBrite™ Spot Light
Note: due to power output constraints, some configurable light lengths may be limited.
