MetaPhase

TX Series Bar Lights   Demanding machine vision applications require superior illumination performance, and the TX Series of Barlights deliver impressive results. The result is an unparalleled machine vision Barlight solution. High-performance design and an array of features and options facilitate application optimization to deliver exceptional results with maximum flexibility and minimal technical risk. Application […]

MB-LE SeriesCompact LED Fiberoptic Light Engines   Designed for direct fiber coupling of up to 8mm fiber bundles and features patent-pending optical and patented thermal control technology as well as a built-in 24 volt LED driver in one small compact package.   LED engines are typically used with optical fiber ring lights and backlights. AVAILABLE

DDC-3 Digital Intensity Controller   Metaphase Technologies’ Digital Dimming Controller (DDC-3) provides 0-10VDC dimming control for three independent LED loads in increments of 0.1V.   The DDC-3 may be remotely controlled over Ethernet using Metaphase Technologies’ MetaBOSS Windows software or by third-party programs using DDC-3’s Ethernet Commands.   User-adjustments of the DDC-3 are provided by

ULC-2 Universal Lighting Controller   The Metaphase ULC-2 The Universal LED Controller provides independent, constant-current control for two LED loads at up to 4 amps continuous DC and maximum output power of 60 Watts per channel. In Pulse (Strobe) Mode, the ULC-2 is capable of output currents up to 40 amps.   The ULC-2 is

LC2-PWM20 Pulse Width Modulated (PWM) Lighting Controller   The LC2-PWM20 is a dual-channel, pulse width modulated LED intensity controller. It outputs 12V PWM from 0-100% at 100kHz to drive LED loads with series limiting resistors.   The maximum output is 20W per channel and 30W combined for two channels. Power is limited by the 24V

MP-LE1007 SeriesMetaphaser LED Light Engine         This system is ideal for replacing older generation “hot light” fiber-based illuminator systems and for green technology efficiency upgrade programs. Designed for fiber optics with light acceptance areas of 6 – 20mm. With an appropriate Metaphase adapter, can mechanically accept fiber optics with outer housing diameters up

MP-LED150 SeriesMicroscope Fiberoptic Illuminator The Metaphase Fiber Optic LED Illuminator provides intense illumination for fiber optic delivery systems. Metaphase Fiber Optic LED Illuminator includes various nose pieces for mating the fiber light guide to the supply. Nose pieces include a Universal nose piece with optional adapters to mate to a wide variety of fiber tip

FIBEROPTIC ILLUMINATION LED LIGHT ENGINES     MetaPhase Fiberoptic Light Sources can be  used either with fiberoptic light pipes and accessories or they can be connected directly to coaxial-illuminated lenses through the len’s 8mm illumination port.   The MetaPhase Compact Light Engine mounts directly on a coaxial-illuminated lens, such as the example shown to the

Lighting Controllers   A successful Machine Vision system implementation benefits greatly from consistent and reliable illumination. Small variations in intensity or spectral content can result in false rejects or allow defective components to pass.   MetaPhase Lighting Controllers provide concise and consistent control to provide over the lifetime of a light source.  ULC-2 Metaphase Technologie’s

Manual Intensity Controllers   Manual Intensity Controllers provide a simple straightforward solution for adjusting the intensity of a MetaPhase lights.  MetaPhase manufactures two different manual intensity controllers.   The ILD-35 is for lights that support a 0 to 10V analog input signal to control the intensity.   The ILD-15 can be used to adjust the