SW-8000T-SFP

SW-8000T-SFP

Prism-based Industrial RGB Line-Scan Camera

10 GigE High Speed interface over FiberOptic
8192 pixels per line at up to 49 kHz for 8-bit RGB output
3 x 8192 Pixel Line-Scan Image Sensors
3.75 μm x 5.78 μm pixel size

SPECIFICATIONS

Model	SW-8000T-SFP
Product Family	Sweep Series
Interface	SPF FiberOptic
Interface Speed	10GBASE-SR / 10GBASE-LR / 10GBASE-ER
Resolution	8,192 x 3 (R,G,B)
Image Sensor	3 high-speed CMOS line sensors, prism-mounted
Pixel Size	MODE A; 7.5 um x 7.5 um MODE B: 7.5 um x 10.5 um
Electronic Shutter	3 μs to 22222 μs in 1 μs increments at 45 kHz. Exposure time can be longer at slower line ratesμ
Spectral Range	Visible
Line Rate	Up to 49.5 kHz (variable) for 8-bit RGB 73.5 kHz possible with YUV compression
Image Sensor PhotoActive Length	30.72 mm
Lens Mount	Nikon F-mount or M52 mount (46.5 mm flange back for both mounts)
Pixel Formats	8RGB8, RGB10V1Packed, RGB10p32, YUV422_8_UVYV, YUV422_8
Power Consumption	+10 VDC to +25 VDC: 11.5 Watts Power-Over-Ethernet not Supported
Dimensions	90.0 mm x 90.0 mm x 90.0 mm
Operating Temperature Range	-5°C to +45°C
Mass	840 g

OVERVIEW

The SW-8000T-SFP is an 8K prism-based industrial RGB color line scan camera with 8,192 pixels per line and a fast, 49 kHz line rate. Its 3-CMOS prism design features three separate imagers that simultaneously capture red, green, and blue spectral wavebands. Included is an advanced set of features providing the best possible performance and precision for web-based or continuous color imaging applications. The camera runs on a 10 Gigabit Ethernet network configuration and features the enhanced Small Form-factor Pluggable optical interface (SFP+).

R-G-B prism quality with optical SFP+ interface and 10 Gigabit Ethernet

The SW-8000T-SFP combines the color accuracy of 3-CMOS prism technology with an optical SFP+ interface and 10 Gigabit Ethernet configuration providing true R-G-B output at up to 49 kHz or YUV output at up to 73 kHz.

The best Image Quality from Any Angle

Prism technology makes it possible to view the red, green and blue channels through a single optical plane. This method eliminates off-angle viewing problems, spatial compensation issues, 3D cylindrical offsets, and other problems that can affect image quality with trilinear cameras.

SFP+ interface with low latency and no data loss

Operating with an SFP+ interface and optical cabling makes it possible to transmit large data packages over 10 km long cables with extremely low latency (low data transmission delay), low noise and no data loss, as optical fiber lines are immune to disturbance from electromagnetic interference.

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	30.720 mm
	Vertical PhotoActive Area (PAA v)	———-
	Diagonal PhotoActive Area (PAA diag)	———-
	Image Sensor Resolution	66.6 line pairs/mm
	Rear Flange Distance	17.526 mm

I/O Pinout

Quantum Efficiency

DOWNLOADS

DataSheet SW-8000T-SFP
Manual SW-4000T-8000T-10GE-SFP
CAD FILE SW-8000T-SPF-F