FS-1600T-10GE-NNM

FS-1600T-10GE-NNM

Three-Image-Sensor MultiSpectral Prism Camera

Visible & Spectral Channels Optically Coupled via Prism
High Speed 10 GigE Interface
Spectral Channels captured by a Monochrome Image Sensors

$ 4,600.00

SPECIFICATIONS

Model	FS-1600T-10GE-NNM
Product Family	Fusion Series
Interface	10 Gbps GigE Vision
Image Sensors	3 x Sony Pregius IMX273 CMOS (Vis/NIR/NIR)
Horizontal Pixels	1,440
Vertical Pixels	1,080
Total Pixels	1.6 MegaPixels
Frame Rate	213 f/s
Light Spectrum	3-Bands: Visible + NIR + NIR
Spectral Range	Visible + NIR
Optics Format	1/2.9 inch
Image Sensor PhotoActive Diagonal	19.301 mm
Pixel Size	3.45 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	8/10/12 bit
Frame Synchronization	Free-run Hardware trigger Software trigger
Trigger Input	Opto In (2), Pulse Generators (4), Software, TTL In (2), NAND Out (2), User Output (4)
Digital I/O	2 Opto-Isolated Input lines, 1 Opto-Isolated Output line

ELECTRICAL

Voltage Input (Hirose 12-pin connector) [POE not supported]	Input Range: +10V to +25V DC
Power Consumption	11.6 W typical @ +12 V

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	62.0 mm x 62.0 mm x 86.5 mm
Mass	270 g
Vibration Tolerance	3G (20 Hz to 200 Hz XYZ)
Shock Tolerance	50g

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

JAI’s FS-1600T-10GE-NNM is a 3-CMOS multispectral prism camera providing simultaneous images of three different spectral bands in a single camera – a visible monochrome channel from 400-670 nm, a near infrared (NIR) channel from 700-800 nm, and a second NIR channel from 820-1000 nm. This makes it possible to simultaneously detect or inspect visible elements, as well as analyze materials or defects using their spectral characteristics within a single NIR band or when combined across both NIR bands. A backwards-compatible 10 GigE interface provides exceptional speed and networking flexibility.

Simultaneous 3-Channel MultiSpectral maging

With a monochrome channel and two separate NIR channels, the FS-1600T-10GE-NNM helps designers of multispectral systems to leverage the different way that some biological substances, foods, chemicals, and other materials appear when viewed in different portions of the visible/NIR spectrum.

Replaces Multiple Inspection Stations with a single setup

JAI’s prism technology ensures perfect three-channel alignment, allowing users to replace multiple inspection stations with a single setup, providing both ease of use and lower equipment and maintenance costs.

Individual Exposure Time adjustment for each channel

Separate exposure control for each channel allows the channels to be adjusted to one another without changes in the gain – maintaining a consistent signal-to-noise ratio at all times.

SPECTRAL RESPONSE

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.968 mm
	Vertical PhotoActive Area (PAA v)	3.726 mm
	Diagonal PhotoActive Area (PAA diag)	6.210 mm
	Image Sensor Resolution	145 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

DOWNLOADS

FS-1600T-10GE-NNM DATASHEET
FS-1600T-10GE-NNM MANUAL
FS-1600T-10GE-NNM MECHANICAL DRAWING
FS-1600T-10GE-NNM FRAME RATE CALCULATOR