SP-5000M-USB

SP-5000M-USB

5 MPixel Monochrome CoaXpress Camera

2,560 x 2,048 Pixels
Large 5.0 μm Square Pixels
Up to 62 fps at full resolution
Convenient USB 3.0 Interface

$ 2,623.00

SPECIFICATIONS

Model	SP-5000M-USB
Product Family	Spark Series
Interface	USB3 Vision
Image Sensor	Teledyne Lince5M
Horizontal Pixels	2,560
Vertical Pixels	2,048
Total Pixels	5.24 MegaPixels
Frame Rate	62 f/s
COLOR or Monochrome	Monochrome
Spectral Range	Visible + NIR
Optics Format	1 inch
Image Sensor PhotoActive Diagonal	16.392 mm
Pixel Size	5.00 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	8/10/12-bit monochrome
Frame Synchronization	Free-run Hardware trigger Software trigger
Digital Inputs	1 Opto-Isolated Input, 1 TTL Input
General Purpose I/O (GPIO)	1 Opto-Isolated Output, 1 TTL Output

ELECTRICAL

Power Input (12-pin Hirose)

PoCXP

+10V to +25V DC. 6.24 W typical @ +12 V
Some limitations apply. See manual for details.

Power Consumption

6.24 Watts

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	62 mm x 62 mm x 55.5 mm (incl. lens mount)
Mass	215 g
Vibration Tolerance	10 G (20 Hz to 200 Hz XYZ directions)
Shock Tolerance	80 G

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

High Throughput with Plug-and-Play Convenience

At 62 frames per second over a standard USB3 Vision interface, the SP-5000-USB provides a combination of speed, resolution, and ease-of-use well suited to a wide range high speed inspection applications.

A versatile Performer – in Monochrome or Color

Available in monochrome or color models, the SP-5000-USB supports single and multi-ROI functions enabling users to create the exact resolution and optical format they require for their high performance application.

Auto Exposure and High Dynamic Range

Monochrome models feature a built-in HDR function that lets users to extend the camera’s dynamic range up to 84 dB. In addition, all models feature a P-iris connection and JAI’s Auto Level Control for intelligent exposure control in dynamic lighting conditions.

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	12.800 mm
	Vertical PhotoActive Area (PAA v)	10.240 mm
	Diagonal PhotoActive Area (PAA diag)	16.392 mm
	Image Sensor Resolution	100 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

12-pin I/O Connector
HIROSE HR10A-10R-12P(71)

PIN	FUNCTION
1	GROUND
2	DC Power Input +10V to +25V
3	GROUND
4	N/C
5	Opto IN 1 ( – )
6	Opto IN 1 (+ )
7	Opto OUT 1 ( – )
8	Opto OUT 1 (+ )
9	TTL OUT 1
10	TTL IN 1
11	DC Power Input +10V to +25V
12	GROUND

10-pin I/O Connector
Type 3260-10S3(55) HIROSE or EQUIV.

PIN	SIGNAL	NOTE
1	TTL Out 2	Line 8
2	NC
3	TTL In 2	Line 10
4	NC
5	GND	GND
6	Lens Power	DC 9 Volts
7	RS-232C Tx	For Lens Control
8	RS-232C Tx	For Lens Control
9	GND
10	GND

DOWNLOADS

SP-5000-USB DATASHEET
SP-5000-USB MANUAL
SP-5000-USB MECHANICAL DRAWING
SP-5000-USB Frame Rate Calculator