SP-5000C-CXP2

SP-5000C-CXP2

5 MPixel COLOR CoaXpress Camera

2560 x 2048 Pixels
Large 5.0 μm Square Pixels
Up to 211 fps at full resolution
CoaXPress-2-Lanes (PoCXP)

$ 3,200.00

SPECIFICATIONS

Model	SP-5000M-CXP2
Product Family	Spark Series
Interface	CoaXPress-2-Lanes (PoCXP) CXP-6
Image Sensor	Teledyne Lince5M
Horizontal Pixels	2,560
Vertical Pixels	2,048
Total Pixels	5.24 MegaPixels
Frame Rate	211 f/s
COLOR or Monochrome	Color
Spectral Range	Visible
Optics Format	1 inch
Image Sensor PhotoActive Diagonal	16.392 mm
Pixel Size	5.00 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	8/10/12-bit Bayer or 24-bit RGB
Frame Synchronization	Free-run Hardware trigger Software trigger
Digital Inputs	1 Opto-Isolated Input, 1 TTL Input
General Purpose I/O (GPIO)	1 Opto-Isolated Output, 1 TTL Output

ELECTRICAL

Power Input (12-pin Hirose)

PoCXP

+10V to +25V DC. 6.8 W typical @ +12 V
Some limitations apply. See manual for details.

Power Consumption

6.8 Watts

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	62 mm x 62 mm x 55.5 mm (incl. lens mount)
Mass	215 g
Vibration Tolerance	10 G (20 Hz to 200 Hz XYZ directions)
Shock Tolerance	80 G

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

High throughput

At 211 frames per second, the SP-5000-CXP2 provides a combination of speed and resolution well suited to many high speed inspection applications, event capture systems, and much more.

A versatile performer – in monochrome or color

Available in monochrome or color models, the SP-5000-CXP2 supports single and multi-ROI functions enabling users to create the exact resolution and optical format they require for their high performance application.

Auto exposure and high dynamic range

Monochrome models feature a built-in HDR function that lets users to extend the camera’s dynamic range up to 84 dB. In addition, all models feature a P-iris connection and JAI’s Auto Level Control for intelligent exposure control in dynamic lighting conditions.

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	12.800 mm
	Vertical PhotoActive Area (PAA v)	10.240 mm
	Diagonal PhotoActive Area (PAA diag)	16.392 mm
	Image Sensor Resolution	100 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

12-pin I/O Connector
HIROSE HR10A-10R-12P(71)

PIN	FUNCTION
1	GROUND
2	DC Power Input +10V to +25V
3	GROUND
4	N/C
5	Opto IN 1 ( – )
6	Opto IN 1 (+ )
7	Opto OUT 1 ( – )
8	Opto OUT 1 (+ )
9	TTL OUT 1
10	TTL IN 1
11	DC Power Input +10V to +25V
12	GROUND

10-pin I/O Connector
Type 3260-10S3(55) HIROSE or EQUIV.

PIN	SIGNAL	NOTE
1	TTL Out 2	Line 8
2	NC
3	TTL In 2	Line 10
4	NC
5	GND	GND
6	Lens Power	DC 9 Volts
7	RS-232C Tx	For Lens Control
8	RS-232C Tx	For Lens Control
9	GND
10	GND

DOWNLOADS

SP-5000M-CXP2 DATASHEET
SP-5000M-CXP2 MANUAL
SP-5000M-CXP2 MECHANICAL DRAWING
SP-5000M-CXP2 Frame Rate Calculator