SP-25000M-CXP4A

SPECIFICATIONS

Model	GO-25000M-CXP4A
Product Family	Spark Series
Interface	GigE Vision 1-Cable (PoE)
Image Sensor	Sony IMX250
Horizontal Pixels	2,464
Vertical Pixels	2,056
Total Pixels	5.1 MegaPixels
Frame Rate	22 f/s
COLOR or Monochrome	Monochrome
Spectral Range	Visible + NIR
Optics Format	2/3 inch
Image Sensor PhotoActive Diagonal	11.071 mm
Pixel Size	3.45 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	8 Bit Mono,10 Bit Mon,10 Bit Mono Packed 12Bit Mono,12Bit Mono Packed
Frame Synchronization	Free-run Hardware trigger Software trigger
Digital Inputs	2 Opto-Isolated Input line
General Purpose I/O (GPIO)	2 General Purpose I/O (GPIO) lines

ELECTRICAL

Voltage Input	5.0 VDC (Provided by USB 3.0 interface)
Power Consumption	3.99 Watts

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	29.0 mm x 29.0 mm x 51.5 mm
Mass	46 g
Vibration Tolerance	10 G (20 Hz to 200 Hz XYZ)
Shock Tolerance	80 G

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

Small and lightweight

Like all Go Series cameras, the GO-5100M-PGE measures 29 x 29 x 41.5 mm (excluding lens mount) and weighs only 46 grams enabling it to fit into small spaces or be mounted on vehicles or robot arms where size and weight are critical.

High image quality and dynamic range

The GO-5100M-PGE leverages the low-noise pixel design of the Sony Pregius IMX250 CMOS imager to provide excellent sensitivity and a native dynamic range of more than 72 dB – perfect for a wide range of machine vision applications.

Proven reliability in industrial environments

Despite its small size and weight, the GO-5100M-PGE is built for the real world, with sturdy housings and extensive shock (80G) and vibration (10G) testing to deliver one of the best MTBF ratings of any small camera – over 200,000 hours. A 3-year warranty is standard.

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	8.501 mm
	Vertical PhotoActive Area (PAA v)	7.093 mm
	Diagonal PhotoActive Area (PAA diag)	11.071 mm
	Image Sensor Resolution	144 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

12-pin I/O Connector

HIROSE HR10A-10R-12P(71)

10-pin I/O Connector

Type 3260-10S3(55) HIROSE or EQUIV.

PIN	DESIGNATION	FUNCTION
1	GROUND
2	DC Power Input
3	GROUND
4	N/C
5	Opto IN 1 ( – )
6	Opto IN 1 (+ )
7	Opto OUT 1 ( – )
8	Opto OUT 1 (+ )
9	TTL OUT 1
10	TTL IN 1
11	DC Power Input
12	GROUND

JAI GO GigE I/O CONNECTOR
Hirose HR-10A-7R-6PB

6-PIN I/O CONNECTOR PINOUT

PIN	DESIGNATION	FUNCTION
1	DC IN	+12 to =24VDC ± 10%
2	Opto IN 1	Opto-coupled I/O input line 5
3	Opto OUT 1	Opto-coupled I/O output line 2
4	Opto OUT 2	Opto-coupled I/O output line 3
5	Opto COMMON	General purpose I/O (GPIO) line
6	GND	Power Supply Ground

DOWNLOADS

GO-5100-PGE DATASHEET
GO-5100-and 5101 PGE MANUAL
GO-5100-PGE MECHANICAL DRAWING
GO-5100 PGE Frame Rate Calculator

26 MegaPixel Monochrome CoaXpress Camera

Four CXP-12 Micro-BNC Ports

Up to 150 fps at full resolution

Small 2.5 μm Square Pixels

Compact Size (29 x 29 x 51.5 mm)

SPECIFICATIONS