GO-5000C-PMCL

SPECIFICATIONS

Discontinued Model – email RITCAM for replacement options

Model	GO-5000C-PMCL
Product Family	Go Series
Interface	Mini CameraLink (PoCL)
Pixel Clock	36/28.8/24 MHz
Readout Modes	Full: 2560 (h) x 2048 (v) up to 105 fps ROI: Any start line, any height in 1 line steps, with X offset and width in 8 pixel steps Binning: 1×2, 2×1, 2×2, 2×4, 4×2, 4×4
Image Sensor	Sony IMX174
Horizontal Pixels	2,560
Vertical Pixels	2,048
Total Pixels	5.24 MegaPixels
Frame Rate	107 f/s (8-bit, 8-tap, full CL)
COLOR or Monochrome	COLOR
Spectral Range	Visible + NIR
Optics Format	1 inch
Image Sensor PhotoActive Diagonal	16.392 mm
Pixel Size	5.00 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	BayerRG8, BayerRG10,BayerRG12 RGB8, RGB10, RGB12
Frame Synchronization	Internal
Trigger Input	TTL, Camera Link (CC1), NAND, Pulse Generator, Software
General Purpose I/O (GPIO)	1 TTL Output Line

ELECTRICAL

Power Input	12V to 24V DC ± 10% (12V ± 1V DC via PoCL)
Power Consumption	2.76W typical @ 12V

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	29.0 mm x 29.0 mm x 41.5 mm
Mass	46 g
Vibration Tolerance	10 G (20 Hz to 200 Hz XYZ)
Shock Tolerance	80 G

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

FEATURES

Small and lightweight

Like all Go Series cameras, the GO-5000-PMCL measures 29 x 29 x 41.5 mm (excluding lens mount) and weighs only 46 grams enabling it to fit into small spaces or be mounted on vehicles or robot arms where size and weight are critical.

Outstanding versatility

Use flexible ROI options to adjust your resolution and optical format as required. 2×2 and 4×4 binning lets you turn the 5-micron standard pixels into extra-sensitive 10-micron or 20-micron effective sizes.

Proven reliability in industrial environments

Despite its small size and weight, the GO-5000-PMCL is built for the real world, with sturdy housings and extensive shock (80G) and vibration (10G) testing to deliver one of the best MTBF ratings of any small camera – over 180,000 hours. A 3-year warranty is standard.

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	12.800 mm
	Vertical PhotoActive Area (PAA v)	10.240 mm
	Diagonal PhotoActive Area (PAA diag)	16.392 mm
	Image Sensor Resolution	100 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

JAI GO PMCL I/O CONNECTOR

COMPATIBLE CONNECTORS:

Camera Side: 09-3111-81-04 (Binder)

Cable Side: 79-3108-52-04 (Binder) AWG 26
or 79-3108-32-04 (Binder) AWG 24

4-PIN I/O CONNECTOR PINOUT

PIN	DESIGNATION	FUNCTION
1	DC Power IN	+12 to =24 VDC ± 10%
2	Input	TTL in, Line 4
3	Output	TTL out, Line 1
4	GND	Power Supply COMMON GROUND

DOWNLOADS

GO-2400-PMCL-1 DATASHEET
GO-2400-PMCL-1 MANUAL
GO-2400-PMCL MECHANICAL DRAWING
GO-2400-PMCL FRAME RATE CALCULATOR

5 Megapixel 1″ CMOS Image Sensor

Up to 165 fps at full resolution

5.86 μm large square pixels

Compact Size (29 x 29 x 41.5 mm)

SPECIFICATIONS