acA4112-8gm

SPECIFICATIONS

Model	acA4112-8gm
Part Number	107411
Product Family	ace L
Interface	GigE (POE)
Image Sensor	Sony IMX304
COLOR or Monochrome	Monochrome
Optics Format	1.1 inch
Lens Mount	C-mount
Horizontal Pixels	4096
Vertical Pixels	3000
Total Pixels	12.0 MegaPixels
Frame Rate	8 Frames/sec
Electronic Shutter	Global
Pixel Size	3.45 µm
Pixel Depth	10 or 12 bits
Output Formats	Mono8 Mono 12 Mono 12 Packed
Frame Synchronization	Software trigger Hardware trigger Free-run
Exposure Control	Hardware trigger Programmable via the camera API
Digital Inputs	1
Digital Outputs	1
GPIO Ports	1
Power Input	PoE or 12-24 VDC
Power Consumption	2.7 Watts
Power Consumption PoE	3.2 Watts
Dimensions	50 mm x 40 mm x 30 mm
Operating Temperature	0 to 50 C
Mass	90g
Standards Compliance	CE, RoHS, GenICam, GigE Vision, IP30, FCC, UL, KC, EAC

EMVA Data

EMVA Quantum Efficiency (typical)	69.0 %
Dark Noise (typical)	2.3 electrons
Saturation Capacity (typical)	10.200 electrons
Dynamic Range (typical)	72.8 dB
Signal-to-Noise Ratio (typical)	40.1 dB

Chunks	CRC Checksum Exposure Time Frame Counter Gain Raw Line Status All Sequence Set Index Timestamp Trigger Input Counter
Event Reporting	Acquisition Start Acquisition Start Overtrigger Acquisition Start Wait Critical Temperature Exposure End Frame Start Frame Start Overtrigger Over Temperature
GigE Vision 2.0	Action Commands (Synchronous Triggering) Precision Time Protocol (IEEE 1588) Scheduled Action Commands
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Exposure Active Frame Trigger Wait Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Light Control Features	Basler SLP
Miscellaneous	Device Information Parameters Device Temperature Remove Parameter Limits User Defined Values User Sets (Configuration Sets) Vignetting Correction
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Test Images Ultra Short Exposure Time Mode

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	14.131 mm
	Vertical PhotoActive Area (PAA v)	10.35 mm
	Diagonal PhotoActive Area (PAA diag)	17.516 mm
	Image Sensor Resolution	145 line pair/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	12–24 VDC Camera Power
2	Line 1	Opto-coupled I/O input line
3	Line 3	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for camera power and GPIO lines