SPECIFICATIONS
| MODEL | LT2PRUP-W |
| Active Area Diameter | 17.6 mm |
| Light Color, Peak Wavelength | Red, 625 nm |
| Spectral FWHM | 20 |
| Illuminance (continuous) (1) | 920 kLux |
| Irradiance (continuous) (1) | 6080 W/m2 |
| Illuminance (strobe) (1) | 2880 kLux |
| Irradiance (strobe) (1) | 14150 W/m2 |
SAFETY
| Risk Group CEI EN 62471:2010 | Risk Group 1 |
ELECTRICAL
| Operating mode | Continuous and strobe |
| Supply voltage (2) | 24 V |
| Current (2) | 2.1 A |
| Power consumption (2) | 50.9 W |
| Peak power consumption (3) | 110.4 W |
| Max LED forward current (3) | 3.0 A |
| Max Pulse Duraction | 2 µsec |
| Max pulse duration | 10 msec |
| Max duty-cycle | 10 % |
| Typical pulse delay | 400 msec |
| Typical jitter | 100 nsec |
| I/O interface | PNP logic input, NPN logic input, analog dimming input |
| Connector | M12 straight plug male connector |
| Cables | 20 cm pigtail |
NOTES
-
At pattern emitting surface.
-
Continuous mode, using the integrated electronic driver.
-
Strobe mode.
