boA2448-250cm

SPECIFICATIONS

Model	boA2448-250cm
Part Number	108672
Product Family	Basler Boost
Interface	CoaXPress
Image Sensor	SONY IMX537
COLOR or Monochrome	Monochrome
Optics Format	1/1.8 inch
Image Sensor PhotoActive Diagonal	8.745 mm
Horizontal Pixels	2,448
Vertical Pixels	2,048
Total Pixels	5.01 MegaPixels
Frame Rate	250 frames/sec
Electronic Shutter	GLOBAL
Pixel Size	2.74 um
Lens Mount Options	F-mount, C-Mount, M42 x 0.75, M42 x 1
Interface	CoaXpress (CXP-12)
Synchronization	Free-Run, Hardware Trigger, Software Trigger
Exposure Control	Programmable via API Hardware Trigger Timing
Digital Inputs	1
GPIO Ports	2

ELECTRICAL

Power Supply	PoCXP or external 24 VDC
Power Consumption	12.0 W

CONFORMITY

Standards Compliance

CoaxPress 2.0 , CE, KC, UL, FCC, GeniCam, EAC, UKCA, RoHS

Chunks	Exposure Time Gain
Color Creation and Enhancement	Brightness and Contrast
I/O Control	Input Filter Serial Communication (UART)
Image Acquisition Control	Acquisition Frame Rate Acquisition Mode Acquisition Start, Stop, and Abort Acquisition Status Exposure Active Trigger Exposure End Trigger Exposure Start Delay Exposure Start Trigger Frame Active Trigger Frame Burst Active Trigger Frame Burst End Trigger Frame Burst Start Trigger Frame End Trigger Frame Start Trigger High Speed Burst Mode Sensor Readout Time Trigger Delay Triggered by Hardware Triggered by Software
Line Source Signals	Counter Active Exposure Active Frame Burst Active Frame Burst Trigger Wait Frame Trigger Wait Serial Tx Timer 1 Active, Timer 2 Active User Output 1, 2, and 3
Miscellaneous	Device Information Parameters Device Temperature Sensor Bit Depth Sensor State Temperature State Transfer Bit Depth User Sets (Configuration Sets) User-Defined Values Vignetting Correction
Pixel Formats	Mono 10 Mono 12 Mono 8
Standard Features	Auto Function Profile Binning Black Level Center X and Center Y Counter Digital Shift Exposure Auto Exposure Mode: Timed Exposure Mode: Trigger Controlled Exposure Mode: Trigger Width Exposure Time Gain Gain Auto Gamma Correction Image ROI (Region of Interest) Lookup Table (LUT) Multiple ROI Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Test Patterns Timer Ultra Short Exposure Time Mode

CONNECTOR PIN NUMBERING & ASSIGNMENTS

I/O PIN NUMBER	DESIGNATION	FUNCTION
1	–	24 VDC Camera Power
2	Line 1	Opto-coupled I/O input line
3	–	Ground for opto-coupled I/O lines
4	Line 2	General Purpose I/O (GPIO) line
5	Line 3	General Purpose I/O (GPIO) line
6	–	Ground for camera power and GPIO lines

Basler Boost Mechanical Drawing

Basler boost 1CXP mountless v02

	Horizontal Photoactive Area Width (PAA h)	6.708 mm
	Vertical Photactive Area Height (PAA v)	5.612 mm
	PhotoActive Area Diagonal (PAA diag)	8.745 mm
	Image Sensor Resolution	182.5 lp/mm

BASLER BOOST CAD FILES

Basler-boost-1CXP-mountless-v02.pdf
Basler boost CXP-12, mountless v02 (DWG TrueView Drawing Interchange)
Basler boost CXP-12, mountless v02 (STP File)

LENS MOUNT OPTIONS (one or more must be ordered with the camera)

DESCRIPTION	Basler p/n	Price
C-mount for boost, racer	2000032041	$ 19.09
M42x0.75-mount (FBD 16 mm) for boost, racer, Basler beat	2000033272	$ 23.06
M42x1-mount (FBD 16 mm) for boost, racer, Basler beat	2000033271	$ 23.06
M42x1-mount (FBD 45.56 mm) for boost, racer, Basler beat	2000035012	$ 61.49

ADDITIONAL OPTIONS

DESCRIPTION	Basler p/n	Price
Heat Sink for Basler boost cameras	2200000317	$ 17.93
Power supply with M8 connector for the Basler cameras boost and ace 2 GigE	2000033325	$ 57.88

CXP-12 INTERFACE CARDS

MODEL	# Ports	Bandwidth	Basler p/n	Price
Basler CXP-12 Interface Card 4C – Frame Grabber	4	50 Gb/sec	2200000702	$ 1,819
Basler CXP-12 Interface Card 2C – Frame Grabber	2	25 Gb/sec	2200000701	$ 1,239
Basler CXP-12 Interface Card 1C – Frame Grabber	1	12.5 Gb/sec	2200000269	$ 1,119
imaWorx CXP-12 Quad – Frame Grabber	4	50 Gb/sec	2200000482	$ 1,879