daA3840-45um (S-Mount)

Board-Level Monochrome CMOS Camera

  • 3,840 x 2,160 pixels @ 45 frames/sec
  • USB 3.0 Interface
  • S-Mount Included

$ 199.00

SPECIFICATIONS

Model daA3840-45um (S-Mount)
Part Number 108271
Product Family Basler dart
Interface USB 3.0
Image Sensor SONY IMX334
COLOR or Monochrome Mono
Optics Format 1/1.8 inch
Lens Mount S-Mount
Horizontal Pixels 3840
Vertical Pixels 2160
Total Pixels 8.29 MegaPixels
Frame Rate 45 Frames/sec
Electronic Shutter Rolling Shutter
Pixel Size 2.00 um
Pixel Depth 8, 12 bits
Pixel Output Formats
Mono 12
Mono 12p
Mono 8
Frame Synchronization Hardware Trigger
Free-Run Mode
Software Trigger
Exposure Control Programmable via the camera API
Hardware trigger
Digital Inputs 0
Digital Outputs 0
General Purpose I/O (GPIO) 4
Power Input via USB 3.0 interface
Power Consumption 1.8 Watts
Dimensions 19.9 mm x 29.3 mm x 29 mm
Operating Temperature 0 to 50°C
Mass 15 g
Standards Compliance CE, RoHS, GenICam, UL, USB3 Vision, FCC, KC

 

FEATURES

Chunks
Auto Brightness Status
CRC Checksum
Counter Value
Exposure Time
Frame ID
Gain
Line Status All
Timestamp
Timestamp Value
Color Creation and Enhancement
Brightness and Contrast
Event Reporting
Exposure End
Frame Start
Frame Trigger Missed
Overrun
Temperature Status Changed
Test
I/O Control
Input Filter
Line Connection
Two-Wire Interface
Image Acquisition Control
Acquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Acquisition Status
Exposure Active Trigger
Exposure End Trigger
Exposure Start Delay
Exposure Start Trigger
Frame Active Trigger
Frame Burst Active Trigger
Frame Burst End Trigger
Frame Burst Start Trigger
Frame End Trigger
Frame Start Trigger
High Speed Burst Mode
Sensor Readout Time
Trigger Delay
Triggered by Hardware
Triggered by Software
Line Source Signals
Counter Active
Exposure Active
Frame Burst Active
Frame Burst Trigger Wait
Frame Trigger Wait
Timer 1 Active, Timer 2 Active
Miscellaneous
Defect Pixel Correction
Device Information Parameters
Device Temperature
Sensor Bit Depth
Temperature State
User Sets (Configuration Sets)
User-Defined Values
PGI
Denoising
Improved Sharpness
Pixel Formats
Mono 12
Mono 12p
Mono 8
Standard Features
Auto Function Profile
Binning
Black Level
Center X and Center Y
Counter
Exposure Auto
Exposure Mode: Timed
Exposure Time
Gain
Gain Auto
Gamma Correction
Image ROI (Region of Interest)
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Test Patterns
Timer

OPTICS

OPTICS PARAMETERS

PAA H 7.680 mm
PAA V 4.320 mm
PAA diagonal 8.812 mm
SPATIAL RESOLUTION 250 lp/mm

 

MECHANICAL & I/O Pinout

Case Type Board Level (no case)
Board Size (Thickness x W x H) 19.9 mm x 29.3 mm x 29 mm
Mass 15 g

Connector Locations 

Camera Connectors and LED Indicator Camera USB 3.0 Connector

I/O Connector Pinout

I/O Connector
Pin Numbering for the I/O Connector		 PIN LABLE FUNCTION
1 – 3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin)
2 – Ground
3 Line 1 General Purpose I/O (GPIO) line PRESET: INPUT LINE
4 Line 2 General Purpose I/O (GPIO) line  PRESET: INPUT LINE
5 – Not Connected
6 – Not Connected

 

IB10274402
IB10274402.pdf (drawing)

DOWNLOADS

Basler Dart USB 3.0 Manual.pdf
IB10274402.pdf (drawing)

 

Shopping Cart
Scroll to Top