acA5472-5gm

SPECIFICATIONS

Model	acA5472-5gm
Part Number	107769
Product Family	ace U
Interface	GigE
Image Sensor	Sony IMX183
COLOR or Monochrome	Monochrome
Optics Format	1 inch
Lens Mount	C-mount
Horizontal Pixels	5472
Vertical Pixels	3648
Total Pixels	19.962 MegaPixels
Frame Rate	5 fps
Electronic Shutter	Rolling
Pixel Size	2.40 um
Pixel Depth	10/12 bits
Frame Synchronization	Software trigger Free-run Hardware trigger
Exposure Control	Programmable via Camera API Hardware trigger
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Digital Inputs	1
Digital Outputs	1
General Purpose I/O (GPIO)	1
Power Input	PoE or 12-24 VDC
Power Consumption	2.6 Watts
Power Consumption PoE	3 Watts
Dimensions	42 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	90g
Standards Compliance	RoHS, GigE Vision, FCC Class B, CE, IP30, GenICam, UL, KC

EMVA DATA

EMVA Quantum Efficiency (typical)	75.2 %
Dark Noise	3.1 electrons
Saturation Capacity	13,800 electrons
Dynamic Range	71.2 dB
Signal-to-Noise Ratio	41.4 dB

Chunks	CRC Checksum Exposure Time Frame Counter Gain Raw Line Status All Sequence Set Index Timestamp Trigger Input Counter
Event Reporting	Acquisition Start Acquisition Start Overtrigger Acquisition Start Wait Exposure End Frame Start Frame Start Overtrigger
GigE Vision 2.0	Action Commands (Synchronous Triggering) Precision Time Protocol (IEEE 1588) Scheduled Action Commands
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Exposure Active Flash Window Frame Trigger Wait Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Light Control Features	Basler SLP
Miscellaneous	Device Information Parameters Device Temperature Remove Parameter Limits User Defined Values User Sets (Configuration Sets) Vignetting Correction
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	13.133 mm
	Vertical PhotoActive Area (PAA v)	8.755 mm
	Diagonal PhotoActive Area (PAA diag)	15.784 mm
	Image Sensor Resolution	208 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	12-24 VDC camera power
2	Line 1	Opto-coupled I/O input line
3	Line 3	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for camera power and GPIO lines