acA720-520um

SPECIFICATIONS

Model	acA720-520um
Part Number	107654
Product Family	ace U
Interface	USB 3.0
Image Sensor	Sony IMX287
COLOR or Monochrome	Monochrome
Optics Format	1/2.9 – inch
Lens Mount	C-mount
Horizontal Pixels	720
Vertical Pixels	540
Total Pixels	0.389 MegaPixels
Frame Rate	525 frames/sec
Electronic Shutter	Global
Pixel Size	5.60 um
Pixel Depth	8/12 bits
Frame Synchronization	Software Trigger Hardware Trigger Free-Run
Exposure Control	Programmable via Camera API Hardware Trigger
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Digital Inputs	1
Digital Outputs	1
General Purpose I/O (GPIO)	2
Power Input	Via USB 3.0 Interface
Power Consumption	3 Watts
Dimensions	29.3 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	80 g
Standards Compliance	RoHS, FCC Class B, CE, IP30, GenICam, USB3 Vision, UL, KC

EMVA DATA

EMVA Peak Quantum Efficiency	63.2 %
Dark Noise	2.9 electrons
Saturation Capacity	20,700 electrons
Dynamic Range	74.2 dB
Signal-to-Noise Ratio	43.2 dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Event Reporting	Critical Temperature Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait Over Temperature
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Light Control Features	Basler SLP
Miscellaneous	Device Information Parameters Device Temperature Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Stacked ROI Test Images Ultra Short Exposure Time Mode

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.032 mm
	Vertical PhotoActive Area (PAA v)	3.024 mm
	Diagonal PhotoActive Area (PAA diag)	5.04 mm mm
	Image Sensor Resolution	89 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN NUMBER	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) lines