acA720-290gm

SPECIFICATIONS

Model	acA720-290gm
Part Number	107650
Product Family	ace U
Interface	GigE
Image Sensor	Sony IMX287
COLOR or Monochrome	Monochrome
Optics Format	1/2.9 inch
Lens Mount	C-mount
Horizontal Pixels	720
Vertical Pixels	540
Total Pixels	0.389 MegaPixels
Frame Rate	291 fps
Electronic Shutter	Global
Pixel Size	5.60 um
Pixel Depth	10/12 bits
Frame Synchronization	Hardware Trigger Free-Run Mode Ethernet Connection (Software)
Exposure Control	Programmable via Camera API Hardware Trigger
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Digital Inputs	1
Digital Outputs	1
General Purpose I/O (GPIO)	1
Power Input	POE or 12-24 VDC
Power Consumption	2.9 Watts
Power Consumption PoE	3.2 Watts
Dimensions	42 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	90g
Standards Compliance	RoHS, FCC Class B, CE, IP30, GenICam, GigE Vision, IEEE 802.3af (PoE), UL, KC

EMVA DATA

EMVA Quantum Efficiency (typical)	62.7 %
Dark Noise	6.6 electrons
Saturation Capacity	21,000 electrons
Dynamic Range	74.2 dB
Signal-to-Noise Ratio	43.2 dB

Chunks	CRC Checksum Exposure Time Frame Counter Gain Raw Line Status All Sequence Set Index Timestamp Trigger Input Counter
Event Reporting	Acquisition Start Acquisition Start Overtrigger Acquisition Start Wait Critical Temperature Exposure End Frame Start Frame Start Overtrigger Over Temperature
GigE Vision 2.0	Action Commands (Synchronous Triggering) Precision Time Protocol (IEEE 1588) Scheduled Action Commands
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Exposure Active Frame Trigger Wait Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Light Control Features	Basler SLP
Miscellaneous	Device Information Parameters Device Temperature Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Stacked ROI Test Images Ultra Short Exposure Time Mode

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.032 mm
	Vertical PhotoActive Area (PAA v)	3.024 mm
	Diagonal PhotoActive Area (PAA diag)	5.04 mm
	Image Sensor Resolution	89 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	12-24 VDC camera power
2	Line 1	Opto-coupled I/O input line
3	Line 3	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for camera power and GPIO lines