acA1920-155um

  • High Speed Monochrome Industrial Camera

    • Sony IMX174 Pregius CMOS Image Sensor
    • 2.3 MegaPixels at 164 frames/sec
    • 1/1.2 inch Optical Format
    • Global Electronic Shutter

$ 1,039.00

SPECIFICATIONS

Model acA1920-155um
Part Number 106879
Product Family ace U
Interface USB 3.0
Image Sensor Sony IMX-174
COLOR or Monochrome Monochrome
Optics Format 1/1.2 – inch
Lens Mount C-mount
Horizontal Pixels 1920
Vertical Pixels 1200
Total Pixels 2.304 MegaPixels
Frame Rate 164 frames/sec
Electronic Shutter Global
Pixel Size 5.86 um
Pixel Depth 10 or 12 bits
Frame Synchronization Software Trigger
Hardware Trigger
Free-Run
Exposure Control Programmable via Camera API
Hardware Trigger
Pixel Formats Mono12
Mono 12p (Mono 12 Packed)
Mono 8
Digital Inputs 1
Digital Outputs 1
General Purpose I/O (GPIO) 2
Power Input Via USB 3.0 Interface
Power Consumption 3.4 Watts
Dimensions 29.3 mm x 29 mm x 29 mm
Operating Temperature 0 to 50 C
Mass 80 g
Standards Compliance CE, RoHS, GenICam, USB3 Vision, FCC, IP30, UL, KC

EMVA DATA

EMVA Peak Quantum Efficiency 70.0 %
Dark Noise 6.6 electrons
Saturation Capacity 32,700 electrons
Dynamic Range 73.7 dB
Signal-to-Noise Ratio 45.0 dB

 

FEATURES

Chunks
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Gain
  • Line Status All
  • Sequencer Set Active
  • Timestamp
Event Reporting
  • Critical Temperature
  • Exposure End
  • Frame Burst Start
  • Frame Burst Start Overtrigger
  • Frame Burst Start Wait
  • Frame Start
  • Frame Start Overtrigger
  • Frame Start Wait
  • Over Temperature
I/O Control and Line Source Signals
  • Acquisition Trigger Wait / Frame Burst Trigger Wait
  • Debouncer
  • Exposure Active
  • Frame Trigger Wait
  • Minimum Output Pulse Width
  • Timer Active
  • User Output
Image Acquisition Control
  • Acquisition Status
  • Frame Burst Start Trigger
  • Frame Start Trigger
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Light Control Features
  • Basler SLP
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • Remove Parameter Limits
  • User Defined Values
  • User Sets (Configuration Sets)
  • Vignetting Correction
PGI
  • Denoising
  • Improved Sharpness
Pixel Formats
  • Mono 12
  • Mono 12p (Mono 12 Packed)
  • Mono 8
Standard Features
  • Auto Function Profile
  • Binning Horizontal
  • Binning Vertical
  • Black Level
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed (Control via API)
  • Exposure Mode: Trigger Width (Control via External Trigger)
  • Gain
  • Gain Auto
  • Gamma Correction
  • Lookup Table (LUT)
  • Region of Interest (ROI)
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Sequencer
  • Stacked ROI
  • Test Images

OPTICS

OPTICS PARAMETERS






Horizontal PhotoActive Area (PAA h) 11.251 mm
Vertical PhotoActive Area (PAA v) 7.032 mm
Diagonal PhotoActive Area (PAA diag) 13.268 mm mm
Image Sensor Resolution 85 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 29.3 mm x 29 mm x 29 mm
Mass 80g

6-PIN HIROSE CONNECTOR PINOUT

PIN NUMBER DESIGNATION FUNCTION
1 Line 3 General purpose I/O (GPIO) line
2 Line 1 Opto-coupled I/O input line
3 Line 4 General purpose I/O (GPIO) line
4 Line 2 Opto-coupled I/O output line
5 Ground for opto-coupled I/O lines
6 Ground for General Purpose I/O (GPIO) lines
Basler ace USB3 C-Mount v02

 

Basler ace USB3 Mechanical Drawing (128 KB)

 

Shopping Cart
Scroll to Top