SPECIFICATIONS
| MODEL |
VVT-9K7C-H80A-128 |
| Horizontal Pixels |
4096 |
| TDI Stages |
32 / 64 / 96 / 128 |
| Pixel Size |
7.00 x 7.00 um |
| COLOR or Monochrome |
Monochrome |
| Pixel Output Formats |
8 bit (2/4/8/10 Tap) / 10 bit (2/4 Tap) / 12 bit (2/4 Tap) |
| Onboard Image Memory |
4 MegaBytes |
| Maximum Line Rate |
125 kHz |
| Minimum Line Rate |
1 kHz |
| Image Sensor |
Proprietary Hybrid TDI Line Scan |
| Interface |
CameraLink Base / Medium / Full / 10 Tap, 26-pin MDR Connector |
| CameraLink Pixel Clock |
85 MHz |
| Throughput |
0.83 Gpixels/s |
| Lens Mount |
M72 x 0.75 |
| Trigger Synchronization |
Free-Run, Timed, Trigger Width |
ELECTRICAL
| Power Supply Requirements |
10 VDC ~ 30VDC |
| Power Consumption |
12.0 Watts |
MECHANICAL
| Length |
90.0 mm |
| Width |
90.0 mm |
| Depth |
38.0 mm |
| Mass |
500 g |
ENVIRONMENTAL
| Operating Ambient Temperature Range |
0℃ ~ 50℃ |
| Storage Temperature Range |
-40℃ ~ 70℃ |
| Compliance |
CE, FCC, KC |
OVERVIEW
VT series Time Delayed Integration line scan cameras are designed for applications where faster line rates and higher sensitivity are critical. The advanced TDI line scan technology based on the outstanding hybrid imaging sensors allows image captures as fast as 250 kHz line rates with up to 128× higher sensitivity using the VT-3K7X camera.
Superior resolution and sensitivity, up to 6,560 pixel resolution at 160 kHz line rate and 256× greater sensitivity can be achieved using the VT-6K3.5X camera.
The VT series is available with the Camera Link interface standard to meet application-specific requirements. Featured with high speed and high sensitivity, this unique technology is ideal for demanding applications such as flat panel display inspection, wafer inspection, printed circuit board inspection, and high-performance document scanning.
OPTICS INFO
OPTICS PARAMETERS
|
Horizontal PhotoActive Area (PAA h) |
62.384 mm |
| Vertical (TDI) PhotoActive Area (PAA v) |
0.896 mm |
| Diagonal PhotoActive Area (PAA diag) |
62.390 mm |
| Image Sensor Resolution |
71.4 line pairs/mm |
| M4272 Mount Rear Flange Distance |
10.10 mm |
MECHANICAL
VT SERIES MECHANICAL DRAWINGS
Drawing_VT_Series_V1.6
DOWNLOADS
VT SERIES DOWNLOADS
