VS ID110 M03I 10EP

ID SeriesSmart Camera

Integrated Flash Controller
High Speed Baumer FEX^® 5.0 Image Processor
Stand-Alone – no computer needed after setup
User-Friendly VeriSens^® Application Suite setup software
Lighting-Fast Image Processing

SPECIFICATIONS

Model	VS XC100C12X00EP
Part Number	11116724
Monochrome or COLOR	COLOR
Horizontal Pixels	1,280
Vertical Pixels	960
Total Pixels	1.23 MegaPixels
Pixel Size	4.65 um
Optical Format	1/3 inch
Image Sensor	Sony ICX-205 CCD
Lens Mount	C-Mount

ONBOARD IMAGE PROCESSING

Maximum Inspection Rate	12 inspections/sec
Maximum Number of Jobs (programs)	255
Features per Job	32
Internal Signal Processing	Baumer FEX^® 5.0
Defect Image Memory	8
Internal Memory	256 Mbit Flash S29GL256P10FFI010

ELECTRICAL

Voltage Supply	18~30VDC
Power Consumption	5 Watts (Imax = 1.5 A @ 12 VDC)
Digital Inputs	5 inputs (8 … 30 V) Trigger Job Selection External Teach-in Encoders (CH-A, CH-B) 500 kHz
Digital Outputs	5 outputs (PNP) Pass / Fail Flash Sync Alarm Camera Ready Output Enable
Initial Setup Interface	Ethernet (10Base-T, 100BASE-TX)
Process Interface	TCP/UDP (Ethernet)
Visualization	Web Interface

INTEGRATED LIGHTING CONTROLLER

Output Voltage	12 VDC or 24 VDC (Contant Current) 24 VDC or 48 VDC (pulsed)
Output Current	I_max = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C) I_max = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C)
Flash On Time	max. 1 ms (Duty Cycle max. 1:10)

ENVIRONMENTAL

Operating Ambient Temperature	+5 … +55 °C @ T = measurement point
Storage Temperature	-20 … +70 °C
Case Temperature	max. +50 °C
Ambient Humidity	0 … 90 % (non-condensing)
Protection Class	IP 67 (with lens protection tube)
Vibration Load	IEC 60068-2-6 IEC 60068-2-64
Mechanical Shock Resistance	EN 60068-2-27

STANDARDS COMPLIANCE

Conformity

CE, RoHS, EAC, KC(R-R-BkR-Verisens-XC-IP)

FEATURE CHECKS

PART LOCATION	Part Location on Contours Part Location on Edges Part Location on Circle Part Location on Text Line
GEOMETRY	Distance Circle Angle Count Edges Point Position
FEATURE COMPARISON	Count Contour Points Contour Comparison Area Size Count Areas Pattern Comparison Color Identification Color Positioning

MECHANICAL & I/O

WIDTH	53.0 mm (without lens tube)
HEIGHT	99.5 mm (without lens tube)
DEPTH	49.8 mm (without lens tube)
MASS	300 g (without lens tube)
HOUSING MATERIAL	Aluminium
COVERGLASS MATERIAL	PMMA

XC100 Mechanical Drawing

C-MOUNT LENS TUBE (IP67 protection)

ELECTRICAL CONNECTOR M12 / 12-pin, A-coded (on device)

ELECTRICAL CONNECTOR – Illumination Port M8/4-pin (on device)

ELECTRICAL CONNECTOR M12 / 4-pin (on device)

DOWNLOADS

ACCESSORIES

STARTER KIT & SEPARATE POWER SUPPLY

	Starter Kit VeriSens Universal p/n 11075442	– Confectioned connection cable M12/12-pin with power supply 24V/1.0A – Ethernet cable – 90° angled fixation bracket incl. screws – Screwdriver Tool – Application Suite (Windows) via Download
	Power Supply 24V/1.0A Int. DC Connector p/n 11079750	– Power Supply 24V/1,0A with adapters for EU, US, UK AU, KR – In combination with “Cable power adapter M12/DC connector” (11048083) suitable for VCXG.I(.XT), VLXT, VAX and VeriSens

IP67 Lens Protection Tubes and Spacers

	XC Tube p/n 11088325	Lens Protection for C-mount lenses Optional XC Tube extension with XC Tube Module 6mm (11115649) or XC Tube Module (11089149), length 12 mm. Use of several Tube Modules possible. Thread: M47 Length 44 mm
	XC Tube Spacer Module 12 mm p/n 11089149	Modular extension of the lens protection of C-mount lenses Thread: M47 Length 12 mm
	XC Tube Spacer Module 6 mm p/n 11115649	Modular extension of the lens protection of C-mount lenses Thread: M47 Length 6 mm

CABLES

	ESG 34JP0200GS Shielded cable 12 wires, female connector, 2.0 meters p/n 11201118	Shielded Process Interface Cable M12/12-pin female connector to open wires Cable Carrier Compatible Suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) Length 2.0 meters
	ESG 34JP0500GS Shielded cable 12 wires, female connector, 5.0 meters p/n 11195097	Shielded Process Interface Cable M12/12-pin female connector to open wires Cable Carrier Compatible Suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) Length 5.0 meters
	ESG 34JP1000GS Shielded cable 12 wires, female connector, 10.0 meters p/n 11195098	Shielded Process Interface Cable M12/12-pin female connector to open wires Cable Carrier Compatible Suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) Length 10.0 meters
	ESG 34JP2000GS Shielded cable 12 wires, female connector, 20.0 meters p/n 11195099	Shielded Process Interface Cable M12/12-pin female connector to open wires Cable Carrier Compatible Suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) Length 20.0 meters
	ESG 33JP0200GS Shielded cable 12 wires, female connector, 2.0 meters p/n 11201128	Shielded Process Interface Cable 90° angled M12/12-pin female connector to open wires Cable Carrier Compatible Suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) Length 2.0 meters
	ESG 33JP0500GS Shielded cable 12 wires, female connector, 5.0 meters p/n 11195094	Shielded Process Interface Cable 90° angled M12/12-pin female connector to open wires Cable Carrier Compatible Suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) Length 5.0 meters
	ESG 33JP1000GS Shielded cable 12 wires, female connector, 10.0 meters p/n 11195095	Shielded Process Interface Cable 90° angled M12/12-pin female connector to open wires Cable Carrier Compatible Suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) Length 10.0 meters
	ESG 33JP2000GS Shielded cable 12 wires, female connector, 20.0 meters p/n 11195096	Shielded Process Interface Cable 90° angled M12/12-pin female connector to open wires Cable Carrier Compatible Suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) Length 20.0 meters
	KSG 34A/KSG45AR0200G/E Ethernet cable for robotic applications p/n 11700903	Ethernet cable for robotic applications M12/4-pin male connector to RJ45 Length 2.0 meters
	Z-KSG 34A/KSG45AC0500G/E Ethernet cable for cable carriers, 5.0 meters p/n 11120360	Shielded Ethernet cable Straight M12/4-pin male connector to RJ45 Cable carrier compatible Length 5.0 meters Phase-Out starting 08/20, alternative via sales
	Z-KSG 34A/KSG45AC1000G/E Ethernet cable for cable carriers, 10.0 meters p/n 11120361	Shielded Ethernet cable Straight M12/4-pin male connector to RJ45 Cable carrier compatible Length 10.0 meters Phase-Out starting 08/20 Alternative article: 11700904 – KSG 34A/KSG45AR1000G/E
	KSG 34A/KSG45AP0500G Ethernet cable, 5,0 meters p/n 10165276	Shielded Ethernet cable Straight M12/4-pin male connector to RJ45 Length 5.0 meters Phase-Out starting 08/20 Alternative article: 11700905 – KSG 34A/KSG45AR0500G/E
	KSG 34A/KSG45AR0200G/E p/n 11700903	M12, male;, D-coded, 4-poles PUR, 200 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 34A/KSG45AR0500G/E p/n 11700905	M12, male;, D-coded, 4-poles PUR, 500 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 34A/KSG45AR1000G/E p/n 11700904	M12, male;, D-coded, 4-poles PUR, 1000 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSW 33A/KSG45AR0200G/E p/n 11701260	M12, male;, D-coded, 4-poles PUR, 200 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 33A/KSG45AR0500G/E p/n 11701261	M12, male;, D-coded, 4-poles PUR, 500 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 33A/KSG45AR1000G/E p/n 11701262	M12, male;, D-coded, 4-poles PUR, 1000 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	Cable Power Adapter M12/DC Connector p/n 11048083	Shielded adapter connection cable M12/12-pin male connector to confectioned DC connector Length 2,0 m Manufactured cable: 11201118 ESG 34JP0200GS

MOUNTING & HEAT SINKS

Fixation bracket VeriSens 1

p/n 10159905

Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers

Fixation bracket VeriSens 2

p/n 10159906

Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers

90° angled

VeriSens laboratory stand

p/n 11051407

Stand for VeriSens

CONTENT: articulated arm, baseplate, one white and one black underlayment, VeriSens mounting with 2 screws (hexagon socket)

max. height of device mounting approx. 28 cm

VS Mounting Adapter

p/n 11177010

Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers

90° angled

TUTORIALS

Baumer VeriSens Tutorial: Configuration Software Overview RUN TIME: 3:45
Baumer VeriSens Tutorial: How to adjust an image with a VeriSens vision sensor RUN TIME: 2:57
Baumer VeriSens Tutorial: Easy color inspection with a VeriSens vision sensor RUN TIME: 5:04
Baumer VeriSens Tutorial: Configurable web interface for VeriSens vision sensors RUN TIME: 5:04
Baumer VeriSens Tutorial: Integrated illumination controller of VeriSens vision sensors RUN TIME: 3:06
Baumer VeriSens Tutorial Process interface assistant of VeriSens vision sensors RUN TIME: 5:02