OptoScope SC-10 Systems

  • High Temporal Resolution: 2 picoSeconds

  • Modular Design for Versatile Use

  • Synchroscan and Triggered Operation

  • Dual-Sweep Available

  • GigE Interface

OVERVIEW

The SC-10 main unit is the central part of a streak camera system. The main unit consist of a streak tube with supply and control electronics including an Ethernet interface to control the system.

The SC-10 main unit is completed with a shutter SH25-10 and a fiber optically coupled image intensifier II125. Using a separate image intensifier within the electro-optical signal chain provides photon counting sensitivity combined with high detection efficiency and low amplification noise. The modular design allows removing shutter or image intensifier for particular requirements.

PHOTOCATHODE

The streak tube is available with different photocathodes having different spectral responses and noise characteristics. Typical data are listed below.

 

TYPE

P/N Reference

Spectral Range

Dark Noise

Bialkali /BI 200 – 700 nm 20 nLux
S20LN /S20LN 200 – 750 nm 40 nLux
S20 /S20 200 – 850 nm 0.20 nLux
S25 /S25 200 – 950 nm 0.40 nLux

 

SPECIFICATIONS

MODEL SC-10
Temporal Resolution ≤2 ps (TSU11-10 or SSU11-10)
PhotoCathode Size 8 mm (horiz) x 2 mm (vert)
Input Window Fused Silica (others upon request)
Streak Tube Magnification 2.0 (typical)
Screen Size 15 mm (horiz) x 20 mm (vert)
Phosphor Type P43 (others upon request)
Static Resolution < 100 um (FWHM on screen)
Sweep Direction Left-Right (slow) / Bottom-Up (fast)
Dimensions 365 mm x 180 mm x 245-250 mm
Mass 16 kg (including SH25-10 and II1 25)
Operating Temperature 0°C to 35°C
Storage Temperature -5°C to 45°C
Supply Voltage 12 VDC
Power Consumption 12 Watts
Dimensions 145 mm x 95 mm x 78.5 mm
Mass 1050 g

MECHANICAL

OPTRONIS SC-10 Mechanical Drawing

DOWNLOADS

CR600x2 DataSheet 

CR Series Camera Quick Start Guide

GigE Network Setup Manual

CamRecord CR Series Manual

TimeViewer Software Manual

TimeBench Software Manual

Programming Guide (with examples)

TimeViewerx86 (Version 1.4.2, 32 bit)

TimeViewerx64 (Version 1.4.2, 64 bit)

TimeBench_2.6.30.ZIP (up to April 2017, license required)

 

CONNECTOR GUIDE

LABLE

DESCRIPTION

1

VGA Connector

2

Power Connector

3

Power LED

4

GigE Connector (RJ-45)

5

GigE Communication LED 1

6

GigE Communication LED 2

7

Sync/Trigger Connector

8

Trigger Control LED

 

ACCESSORIES

F-Mount lens adapter

CP-FM

C-Mount lens adapter
CP-CM

G-Mount lens adapter

CP-FMG

CR-CanonAF-Mount for CamRecord-CR series cameras to allow remote focal and aperture control of Canon EF lenses.

 

CR-SDK

Software development kit for CamRecord-CR cameras to integrate Slow-Motion cameras of CamRecord-CR series into customer specific software solutions under C/C++ and Windows operating system.

CR-LabVIEW

LabVIEW driver for CamRecord-CR and CamRecord-Sprinter series cameras

Shopping Cart
Scroll to Top