acA1300-30uc

SPECIFICATIONS

Model	acA1300-30uc
Part Number	106218
Product Family	ace Classic
Interface	USB 3.0
Image Sensor	Sony ICX445
COLOR or Monochrome	Color
Optics Format	1/3 inch
Lens Mount	C-mount
Horizontal Pixels	1294
Vertical Pixels	964
Total Pixels	1.3 MegaPixels
Frame Rate	30 Frames/sec
Electronic Shutter	Global
Pixel Size	3.75 µm
Pixel Formats	12 bits
Pixel Depth	Software trigger Hardware trigger Free-run
Frame Synchronization	Programmable via the camera API Hardware trigger
Exposure Control	1
Digital Inputs	1
Digital Outputs	USB 3.0 interface
Power Input	3.0 Watts
Power Consumption	–
Dimensions	29.3 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	80g
Standards Compliance	CE, GenICam, IP30, UL, FCC, USB3 Vision, RoHS, KC, EAC

EMVA DATA

EMVA Peak Quantum Efficiency	–
EMVA Quantum Efficiency – blue (typical)	7.2 %
EMVA Quantum Efficiency – green (typical)	41.0 %
EMVA Quantum Efficiency – red (typical)	3.0 %
Dark Noise	24.1 electrons
Saturation Capacity	9.400 electrons
Dynamic Range	51.7 dB
Signal-to-Noise Ratio	39.7 dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Color Creation and Enhancement	Balance White (Manual White Balance) Balance White Auto (Automatic White Balance) Color Adjustment (6-axis Hue/Saturation) Light Source Presets
Event Reporting	Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
Pixel Formats	BGR 8 BGRA 8 Bayer 12 Bayer 8 Mono 8 RGB 8
Standard Features	Auto Function Profile Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.853 mm
	Vertical PhotoActive Area (PAA v)	3.615 mm
	Diagonal PhotoActive Area (PAA diag)	6.051 mm
	Image Sensor Resolution	133 lp/mm
	Rear Flange Distance	17.526 mm

PIN NUMBER	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) lines

Basler Offline Product Documentation (36 MB)
Basler Ace USB3 Mechanical Drawing (128 KB)
ace USB3 3D CAD Drawings (848 kB Compressed File)
pylon Deployment Guide (Software Version 6.x) – Installation Guide (223 kB)