Pulsar 320E
High Current Strobe Controller
The Pulsar 320E provides the ultimate in lighting control for strobe-only, high power applications.
The unit provides 2 outputs for controlling 2 lights independently, each capable of 50A @ 100V DC.
NOTE: If you’ve purchased a Pulsar 320 in the past, please see the change notice below for details on what updates have been made to the Pulsar series.
| CHANNEL CONTROL | 8 Independent Channels 2 Output Connectors |
| MODES | Strobe Only |
| POWER REQUIREMENT | 24V DC Nominal, 4.0A Maximum |
| OUTPUT POWER | 50A per output, 100A total output 100V DC per output |
| TRIGGER LATENCY | < 2 μs |
| STROBE FREQUENCY LIMIT | 2 kHZ |
| PULSE WIDTH RANGE | 1 μs to 100msec |
| USER INTERFACE | Software |
| OPERATING TEMPERATURE | 0°C to 60°C |
Pulsar 320E Mechanical Drawing
SPECIFICATION SHEET
CAD FILES
DRAWINGS
MANUALS
SOFTWARE (Pulsar 320)
- Pulsar 320 Graphical User Interface (ZIP)
- Pulsar 320 Software Development Kit (ZIP)
- Pulsar 320 Loader (ZIP)
- Pulsar 320 National Instruments LabView VI (ZIP)
- Pulsar 320 .NET Framework 3.5 (ZIP)
SOFTWARE (Pulsar 320E)
The following software is not compatible with the original Pulsar 320 and must be downloaded to run the Pulsar 320E.
Notice Type: Product Change
Product Type: Pulsar 320
Change Notification Summary
Effective immediately, Advanced illumination’s (Ai) Pulsar 320 is no longer available and will be replaced with the Pulsar 320E. The microprocessor used within the Pulsar 320 was discontinued so Ai was forced to replace it. To properly support this new microprocessor, an updated software revision is now required to operate new units. A link to this new software revision will be available on the Pulsar 320E product webpage under downloads. In Q3 of 2021, additional features will be added to the Pulsar 320E, including but not limited to improved commands, DHCP support and UDP functionality.
If you currently have an older Pulsar 320, all of the necessary downloads for that device will remain accessible under the downloads section on the Pulsar 320E webpage.
To make the differentiation between the original Pulsar 320 and the new Pulsar 320E visually clear, Ai has updated the Pulsar 320E front labels to incorporate green as a primary color, as opposed to gray.
Please contact your Ai Sales Representative if you have any questions.