new! FD2 Series
Back-Lit High-Intensity Flat Diffuse-Dome Lights
The new FD2 Series is an updated version of the older FD Series Back-Lit LED Flat Dome Series.
FD2 Series Back-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects. Two aperture (lens view hole) diameters are available to accommodate various lens diameters: .88” (22.3mm) and 1.75” (44.5mm). The FD2 Series is available in visible and infrared wavelengths and offers an optional polarizer.
The FD2 Series provides light intensities of up to 11.7 kLux at 4” (102mm) standoff, and offers pre-engineered, expandable from 3”x 3” to 22”x 34” in 1” (25mm) increments.
For similar performance in a thinner housing, refer to the Edge-lit Flat Diffuse Lights (FX Series.)
CURRENT | COLOR | 24VDC Current | All Other Controls |
| 660, 880 | 30 mA per square inch | 18 mA Max per square inch | |
| 470, 520, WHI | 20 mA per square inch | 18 mA Max per square inch |
| OPERATING TEMPERATURE | 0 to 60°C |
| MASS | 8″ x 8″ unit: 997.9 g (35.2 oz) |
| STANDARD CABLE | 2 M long -0/+150 mm (80″ -0/+6″) – 105°C rated PVC jacket, foil shield with drain |
| PHOTOBIOLOGICAL SAFETY | Exempt Applicable Wavelengths: 880 Group 1 (Low-Risk) Applicable Wavelengths: 470, 520, 660, WHI |
| STANDARDS COMPLIANCE | CE, RoHS, IEC 62471 |
| IP RATING | IP50 |
| LUMINANCE MAINTENANCE | L70 = 50,000 Hours |
 |  |  |  |
PLEASE NOTE: Substitute”FD2″ for “FD” in part number guide below.