CP90-4-C-500

Color High Speed Machine Vision Camera

  • 4-MegaPixels at 500 Frames/sec

  • Global Shutter

  • Alexima AM41 CMOS Image Sensor

  • CoaXPress v 1.1 Interface

 

Add to quote

SPECIFICATIONS

MODEL CP90-4-C-500
Horizontal Pixels 2,304
Vertical Pixels 1,720
Total Pixels 3.96 MegaPixels
Frame Rate (Full Resolution) 500 frames/sec
Color or Monochrome COLOR
Image Sensor Alexima AM41
Pixel Size 7.00 um
Image Sensor PhotoActive Area 16.128 mm (h) x 12.040 mm (v) x 20.126 mm (Diagonal)  
Electronic Shutter GLOBAL
Interface CoaXPress 1.1 (4 channel CXP-6)
4 x DIN 1.0/2.3 connectors
Digital I/O 1 Opto-Isolated Trigger In
1 TTL Sync Output
Lens Mount F-Mount (Option for C, G or M42 Mount)
Supply Voltage PoCXP 24 VDC or external
Power Consumption 9.5 Watts
Dimensions 85 mm x 85 mm x 62.5 mm
Mass 400 g (without mount)
Operating Temperature Range 0C – 40C

OVERVIEW

The CP80-4-M/C-500 and CP90-4-M/C-500 cameras are equipped with a 4 megapixel AM41 monochrome or color image sensor from Alexima. An outstanding feature, in addition to the high image rate in global shutter mode, is the linear speed increase in the Y direction, which makes the sensor particularly well suited to Region of Interest high frame rate applications.

The sensor image is homogeneous and has an extremely low pixel error count of less than 4 over the entire sensor surface. The A/D converter depth is 8 bit. The CP80-4-*-500 and CP90-4-*-500 cameras of the CamPerform-CP series are specified to EMVA1288 and tested for consistent image quality.

MECHANICAL

MECHANICAL DRAWINGS

CP80-3-MC-540 und CP90-3-MC-540_CADModels

DOWNLOADS

DOCUMENTATION

CP90-4-M/C-50 Datasheet 
CP90/CP80-4-M/C-500 Manual
CP80-4-MC-500 and CP90-4-MC-500 Firmware

CamPerform-CP / CamPerform-Cyclone Firmware Update Software

EVALUATION SOFTWARE

TimeViewerx86 (Version 1.4.2, 32 bit)

TimeViewerx64 (Version 1.4.2, 64 bit)

MECHANICAL DRAWINGS

CP80-4-M-500 and CP90-4-M-500_CAD_models

 

ACCESSORIES

F-Mount lens adapter
CP-FM
C-Mount lens adapter

CP-CM
G-Mount lens adapter

CP-FMG
M42x1 lens adapter

CP-M42
M42x0.75 lens adapter

CP-T2
Power supply CP70, CP90
Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series
Shopping Cart
Scroll to Top