PCCD Series Catadioptric Lenses
360° top and lateral view with just one camera

 

The PCCD series optics are catadioptric lenses exclusively developed and manufactured by Opto Engineering® to enable a complete 360° side view of small objects.  An innovative optical design, based on a catadioptric system, makes it possible to image objects with diameters as small as 7 mm. The sides of the object are imaged through the catadioptric system, while the top surface is directly imaged onto the center of the detector.

 

The compactness and high resolution of these lenses make them ideal to inspect components like pharmaceutical containers, plastic caps, pre-forms, bottlenecks, screws and other threaded objects. PCCD series can work either with 1/2”, 1/3” and 2/3” detectors. The sides of the object being inspected are observed over a wide view angle, approaching 45° at its maximum; this feature makes it possible to inspect complex object geometries from a convenient perspective.

 

The new PCCDL model supports larger fields of view and larger-format image sensors up to 1.1-inch format.

Catadiotric lens looking down at top of a bottle. Sidewalls of cap and bottle are clearly visible.

MODEL
NUMBER		OPTICAL
FORMAT		IMAGE
CIRCLE


(mm)		FIELD
of VIEW
MINIMUM

(mm x mm)		FIELD
of VIEW
MEDIUM

(mm x mm)		FIELD
of VIEW
MAXIMUM

(mm x mm)		WORKING
DISTANCE
MINIMUM
OBJECT
(mm)		WORKING
DISTANCE
MEDIUM
OBJECT
(mm)		WORKING
DISTANCE
MAXIMUM
OBJECT
(mm)		ANGLE
of VIEW


(degrees)		f-NumberLENS
LENGTH


( mm )		LENS
DIA


( mm )		LENS
MASS


( gm )
PCCD0131/3''3.67.5 x 4.235.0 x 24.275.0 x 2.550.59.20.035.0f/1.4 - close111.2143.0995
PCCD0121/2''4.87.5 x 4.235.0 x 24.275.0 x 2.550.59.20.035.0f/1.4 - close108.0143.0988
PCCD0232/3''6.67.5 x 4.235.0 x 24.275.0 x 2.550.59.20.035.0f/1.4 - close108.5143.0994
PCCD2M1''9.67.5 x 4.235.0 x 24.275.0 x 2.550.59.20.035.0f/1.4 - close113.8143.01,002
PCCDL1/2' to 1.1"'4.8 to 10.010.0 x 1.750.0 x 38.3110.0 x 1.476.19.00.035.0f/28 - close129.5215.01,984
Shopping Cart
Scroll to Top