FSFE-1600T-10GE

Three-Image-Sensor MultiSpectral Prism Camera

  • Visible & Spectral Channels Optically Coupled via Prism

  • High Speed 10 GigE Interface

  • Sony Pregius IMX273 1.6 MegaPixel CMOS Image Sensors

SPECIFICATIONS

Model FSFE-1600T-10GE
Product Family Fusion Series
Interface 10  Gbps GigE Vision
Image Sensors 3 x Sony Pregius IMX273 CMOS (Vis/NIR/NIR)
Horizontal Pixels 1,440
Vertical Pixels 1,080
Total Pixels 1.6 MegaPixels
Frame Rate 213 f/s
Light Spectrum 3-Bands: Visible + NIR + NIR
Spectral Range Visible + NIR
Optics Format 1/2.9 inch
Image Sensor PhotoActive Diagonal 19.301 mm
Pixel Size 3.45 μm
Lens Mount C-mount
Electronic Shutter Global
Pixel Formats 8/10/12 bit
Frame Synchronization Free-run
Hardware trigger
Software trigger
Trigger Input Opto In (2), Pulse Generators (4), Software,
TTL In (2), NAND Out (2), User Output (4)
Digital I/O 2 Opto-Isolated Input lines, 1 Opto-Isolated Output line

ELECTRICAL

Voltage Input (Hirose 12-pin connector) [POE not supported] Input Range: +10V to +25V DC
Power Consumption 11.6 W typical @ +12 V

MECHANICAL

Case Type Metal Shielded Box
Case Size (L x W x H) 62.0 mm x 62.0 mm x 86.5 mm
Mass 270 g
Vibration Tolerance 3G (20 Hz to 200 Hz XYZ)
Shock Tolerance 50g

STANDARDS COMPLIANCE

REGULATIONS CE (EN61000-6-2, EN61000-6-3),  FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature -5°C to +45°C
Storage Temperature -25°C to +60°C
Humidity 20% – 80% non-condensing

OVERVIEW

JAI’s FSFE-1600T-10GE model is a 3-CMOS multispectral prism camera design that you can customize to meet the needs of your application. It features three, prism-mounted 1.6-megapixel CMOS imagers that are aligned to a common optical path for perfect image registration regardless of motion or viewing angle.

The Flex-Eye concept lets you create your own custom version of this camera. You define the width and location for each of the camera’s two wavebands, placing them all in the visible spectrum or in a combination of visible and NIR locations required to maximize the effectiveness of your vision system for multispectral inspection or analysis.

MultiSpectral Imaging – Your Way!

With Flex-Eye you can custom design your own multispectral camera, getting simultaneous imaging of visible or visible plus near infrared wavebands fine-tuned to your specific application. For each of the 3-CMOS sensors you can define the spectral location and width of the waveband within the spectral range of 405 nm to 1000 nm.

Higher Resolution and Higher Efficiency

The new generation of JAI’s multispectral Fusion cameras provides four times higher resolution than previous models and sets a new standard for frame rates (213 frames/s in full resolution) thanks to the use of a fast “Pregius” sensor (IMX273), as well as the use of a high-speed 10 GigE interface.

Replaces Multiple Inspection Stations with a Singe Camera Setup

JAI’s multispectral prism technology ensures perfect three-channel alignment, allowing users to replace multiple inspection stations with a single setup, providing both ease of use and lower equipment and maintenance costs. All designed to lead to better efficiency, productivity, and quality of your vision system.

SPECTRAL RESPONSE

OPTICS

OPTICS PARAMETERS







Horizontal PhotoActive Area (PAA h) 4.968 mm
Vertical PhotoActive Area (PAA v) 3.726 mm
Diagonal PhotoActive Area (PAA diag) 6.210 mm
Image Sensor Resolution 145 line pairs/mm
C-Mount Flange Distance 17.526 mm

 

I/O Pinout

DOWNLOADS

FS-1600T-10GE DATASHEET
FS-1600T-10GE-NNM MANUAL
FS-1600T-10GE-NNM MECHANICAL DRAWING
FS-1600T-10GE-NNM FRAME RATE CALCULATOR
Shopping Cart
Scroll to Top