FS-1600D-10GE

FS-1600D-10GE

Dual-Image-Sensor MultiSpectral Prism Camera

Visible & Spectral Channels Optically Coupled via Prism
Color Image captured by Color Bayer Image Sensor
Spectral Channel captured by a Monochrome Image Sensor

$ 2,150.00

SPECIFICATIONS

Model	FS-1600D-10GE
Product Family	Fusion Series
Interface	10 Gbps GigE Vision
Image Sensors	2 x Sony Pregius IMX273
Horizontal Pixels	1,440
Vertical Pixels	1,080
Total Pixels	1.6 MegaPixels
Frame Rate	226 f/s
Light Spectrum	2-Bands: Visible + NIR
Spectral Range	Visible
Optics Format	1/2.9 inch
Image Sensor PhotoActive Diagonal	19.301 mm
Pixel Size	3.45 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	8/10/12 bit
Frame Synchronization	Free-run Hardware trigger Software trigger
Trigger Input	Opto In (2), Pulse Generators (4), Software, TTL In (2), NAND Out (2), User Output (4)
Digital I/O	2 Opto-Isolated Input lines, 1 Opto-Isolated Output line

ELECTRICAL

Voltage Input (Hirose 12-pin connector)	Input Range: +10V to +25V DC
Power Consumption	10.4 W typical @ +12 V

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	62.0 mm x 62.0 mm x 86.5 mm
Mass	270 g
Vibration Tolerance	3G (20 Hz to 200 Hz XYZ)
Shock Tolerance	50g

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

The FS-1600D-10GE is a 2-CMOS multispectral prism camera providing simultaneous images of different spectral bands in a single camera – a visible color channel from 400-670 nm and a near infrared (NIR) channel from 740-1000 nm. This makes it possible to simultaneously inspect surface properties and sub-surface defects. A backwards-compatible 10 GigE interface provides exceptional speed and networking flexibility.

Simultaneous Color and Near-Infrared (NIR) imaging

The visible light channel outputs RGB or Bayer color images spanning the wavelengths visible to the human eye. The NIR channel, on the other hand, “sees” below the surface of organic and other materials to detect imperfections the human eye cannot see.

Replaces Multiple Inspection Stations with a single setup

JAI’s prism technology ensures perfect two-channel alignment, allowing users to replace multiple inspection stations with a single setup, providing both ease of use and lower equipment and maintenance costs.

Individual Exposure Time adjustment for each channel

Separate exposure control for each channel allows the channels to be adjusted to one another without changes in the gain – maintaining a consistent signal-to-noise ratio at all times.

SPECTRAL RESPONSE

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.968 mm
	Vertical PhotoActive Area (PAA v)	3.726 mm
	Diagonal PhotoActive Area (PAA diag)	6.210 mm
	Image Sensor Resolution	145 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

DOWNLOADS

FS-1600D-10GE DATASHEET
FS-1600D-10GE MANUAL
FS-1600D-10GE MANUAL – Multi Streaming Camera Connection Guide
FS-1600D-10GE MECHANICAL DRAWING
FS-1600D-10GE FRAME RATE CALCULATOR