AP-3200T-USB-LS

AP-3200T-USB-LS

High Resolution 3 x CMOS Microscopy Camera

  • 3 x Sony IMX265 Pregius Image Sensors

  • Visible & Spectral Channels Optically Coupled via Prism

  • USB 3.0  Interface: External Power Supply Required

$ 4,810.00

SPECIFICATIONS

Model AP-3200T-USB-LS
Product Family Apex Medical Solutions
Interface USB 3.0 Vision
Image Sensors 3 x Sony Pregius IMX265 CMOS (Vis/NIR/NIR)
Horizontal Pixels 2,064
Vertical Pixels 1,544
Total Pixels 3 x 3.2 MegaPixels
Frame Rate 38 f/s
Light Spectrum 3-Bands: Visible
Spectral Range Visible + IR when IR Cut Filter Removed
Optics Format 1/1.8 inch
Image Sensor PhotoActive Diagonal 8.893 mm
Pixel Size 3.45 μm
Lens Mount C-mount
Electronic Shutter Global
Pixel Formats 8/10/12 bit
Frame Synchronization Free-run
Hardware trigger
Software trigger
Trigger Input Opto In (2), Pulse Generators (4), Software,
TTL In (2), NAND Out (2), User Output (4)
Digital I/O 2 Opto-Isolated Input lines, 1 Opto-Isolated Output line

ELECTRICAL

Voltage Input (Hirose 12-pin connector) [USB Bus Power not supported] Input Range: +12V to +24V DC
Power Consumption 5.3 W typical @ +12 V

MECHANICAL

Case Type Metal Shielded Box
Case Size (L x W x H) 44.0 mm x 44.0 mm x 74 mm
Mass 170 g
Vibration Tolerance 3G (20 Hz to 200 Hz XYZ)
Shock Tolerance 50g

STANDARDS COMPLIANCE

REGULATIONS CE (EN61000-6-2, EN61000-6-3),  FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature -5°C to +45°C
Storage Temperature -25°C to +60°C
Humidity 20% – 80% non-condensing

OVERVIEW

The Apex AP-3200T-USB-LS is a 3-CMOS prism-based R-G-B area scan camera intended for microscopy applications in the medical and life sciences markets. The multi-sensor prism technology provides better color fidelity and spatial precision than traditional Bayer color cameras, while the USB3 Vision interface offers excellent plug and play compatibility.
The camera is built around the PregiusTM IMX265 1/1.8-inch sensor featuring 2,064 x 1,544 pixels and pixel sizes of 3.45 µm x 3.45 µm. A standard C-mount can be easily adapted to most types of digital microscopes or can be used with a variety of standard or telecentric lenses in larger systems.

The camera can be optionally ordered with the IR-cut filter removed (AP-3200T-USB-NF-LS) for applications needing extended sensitivity in the red/NIR channel. Drivers/device adapters are available for the popular ImagePro software from Media Cybernetics (sold separately), as well as for the open source Micro-Manager software package.

Exceptionally Accurate Color Image Data

Using a special prism-based imaging technique, the incoming light is separated into red, green and blue wavelengths, captured by three precisely-aligned CMOS sensors. The result is better color accuracy and spatial precision than traditional color cameras using the Bayer mosaic technique.

High Resolution Combined with High Frame Rate

The AP-3200T-USB-LS is built around three Sony Pregius IMX265 sensors. Combined with a USB3 Vision interface, this machine vision camera can output as much as 3 x 3.2 megapixels at nearly 38 frames/second in full resolution.

Compatibility with Third-Party Microscopy Software

The AP-3200T-USB-LS is compatible with the widely-used ImagePro software from Media Cybernetics. Or if open source is preferred, device adapters are included at no cost in the latest release of the Micro-Manager software package.

FEATURES

  • 3-CMOS prism-based RGB camera.

  • 3 x IMX265 Sony Pregius sensors.

  • True raw image data (Red, Green and Blue). Also available with IR-cut filter removed (AP-3200T-USB-NF-LS) for extended sensitivity in the red/NIR channel.

  • USB3 Vision interface

  • Analog gain and exposure setting for each individual R-G-B channel.

  • Flexible color space conversion from raw RGB to sRGB, Adobe RGB, HSI, CIE XYZ, or custom RGB formats.

  • Single and Multi-Region-of-Interest (ROI).

  • Automatic level control.

  • Shading correction on ROI.

  • Color temperature presets.

  • Built-in color enhancer and edge enhancer functions.

  • Pixel binning (2×1, 1×2 and 2×2).

  • Chunk data for each image.

  • Compatible with Image-Pro and Micro-Manager software packages.

  • White housing with robust and compact design (Shock 50G/Vibration 3G).

SPECTRAL RESPONSE

OPTICS

OPTICS PARAMETERS







 Horizontal PhotoActive Area (PAA h) 7.121 mm
Vertical PhotoActive Area (PAA v) 5.327 mm
Diagonal PhotoActive Area (PAA diag) 8.893 mm
Image Sensor Resolution 145 line pairs/mm
Effective C-Mount Flange Distance 17.526 mm
CAUTION: Maximum Lens Rear Mechanical Protrusion: 4 mm

 

I/O Pinout

JAI GO USB I/O CONNECTOR
Hirose HR-10A-10R-12PB (71)

 

 

USB3 Vision Interface Connector

Micro-B Type – ZX3600-B-10P or equivalent
PIN FUNCTION
1 Ground
2 DC input +12VDC to +24VDC
3 Opto IN 2 (-)
4 Opto IN 2 (+)
5 Opto IN 1 (-)
6 Opto IN 1 (+)
7 Opto OUT 1 (-)
8 Opto OUT 1 (+)
9 TTL Out 1
10 n/c
11 C input +12VDC to +24VDC
12 Ground
PIN I/O Name Note
1 I VBUS IN Power (VBUS)
2 I/O DM USB2.0 Differential pair (-)
3 I/O DP USB2.0 Differential pair (+)
4   OTG ID USB OTG ID for identifying lines
5   GND GND
6 O FX3 SSTXM USB3.0 Signal Transmission line (-)
7 O FX3 SSTXP USB3.0 Signal Transmission line (+)
8 GND GND GND
9 I FX3 SSRXP USB3.0 Signal Receiving line (-)
10 I FX3 SSRXM USB3.0 Signal Receiving line (+)

DOWNLOADS

AP-3200T-USB-LS DATASHEET
Flyer-Apex-Series-AP-3200T-AP-1600T
Flyer – Apex Microscopy
AP-1600T-USB MANUAL
CAD file – AP-3200T-USB / AP-1600-USB
AP-3200T-USB FRAME RATE CALCULATOR
Shopping Cart
Scroll to Top