FSFE-1600D-10GE

FSFE-1600D-10GE

Configurable 2-Sensor MultiSpectral Camera

Flex-Eye Base Model
Prism-Coupled Monochrome Sony IMX252 CMOS Sensors
High Speed 10 GigE Interface

$ 2,150.00

SPECIFICATIONS

Model	FSFE-1600D-10GE
Product Family	Fusion Series – Flex-Eye Version
Interface	10 Gbps GigE Vision
Image Sensors	2 x Sony Pregius IMX273
Horizontal Pixels	1,440
Vertical Pixels	1,080
Total Pixels	1.6 MegaPixels
Frame Rate	226 f/s
Light Spectrum	2-Bands: Visible (mono or color) + NIR
Spectral Range	Visible + NIR
Optics Format	1/2.9 inch
Image Sensor PhotoActive Diagonal	19.301 mm
Pixel Size	3.45 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	8/10/12 bit
Frame Synchronization	Free-run Hardware trigger Software trigger
Trigger Input	Opto In (2), Pulse Generators (4), Software, TTL In (2), NAND Out (2), User Output (4)
Digital I/O	2 Opto-Isolated Input lines, 1 Opto-Isolated Output line

ELECTRICAL

Voltage Input (Hirose 12-pin connector)	Input Range: +10V to +25V DC
Power Consumption	10.4 W typical @ +12 V

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	62.0 mm x 62.0 mm x 86.5 mm
Mass	270 g
Vibration Tolerance	3G (20 Hz to 200 Hz XYZ)
Shock Tolerance	50g

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

The FS-1600D-10GE is a 2-CMOS multispectral prism camera providing simultaneous images of different spectral bands in a single camera – a visible color channel from 400-670 nm and a near infrared (NIR) channel from 740-1000 nm. This makes it possible to simultaneously inspect surface properties and sub-surface defects. A backwards-compatible 10 GigE interface provides exceptional speed and networking flexibility.

MultiSpectral Imaging tailored to your spectral requirements

With Flex-Eye you can custom design your own multispectral camera, getting simultaneous imaging of visible or visible plus near infrared wavebands fine-tuned to your specific application. For each of the 2-CMOS sensors you can define the spectral location and width of the waveband within the spectral range of 405 nm to 1000 nm.

Higher Resolution and Higher Efficiency

The new generation of JAI’s multispectral Fusion cameras provides four times higher resolution than previous models and sets a new standard for frame rates (226 frames/s in full resolution) thanks to the use of a fast “Pregius” sensor (IMX273), as well as the use of a high-speed 10 GigE interface.

Replaces Multiple Inspection Stations with a single camera setup

JAI’s multispectral prism technology ensures perfect two-channel alignment, allowing users to replace multiple inspection stations with a single setup, providing both ease of use and lower equipment and maintenance costs. All designed to lead to better efficiency, productivity, and quality of your vision system.

SPECTRAL RESPONSE

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.968 mm
	Vertical PhotoActive Area (PAA v)	3.726 mm
	Diagonal PhotoActive Area (PAA diag)	6.210 mm
	Image Sensor Resolution	145 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

DOWNLOADS

FSFE-1600D-10GE DATASHEET
FSFE-1600D-10GE MANUAL
FSFE-1600D-10GE MANUAL – Multi Streaming Camera Connection Guide
FSFE-1600D-10GE MECHANICAL DRAWING
FSFE-1600D-10GE FRAME RATE CALCULATOR