SPECIFICATIONS
| Model | LT-200TL-CL |
| Product Family | Sweep+ Series |
| Resolution | 2,048 x 1 |
| Pixel Size |
14.0 μm |
| Line Scan Rate | Up to 30.383 kHz |
| Interface | CameraLink |
| Pixel Clock | 80 MHz |
| Image Sensor | 3 prism-mounted custom CMOS sensors Effective pixels : 2048 pixels per sensor Pixel Size : 14.0μm ×14.0μm Effective image length : 28.672 mm |
| COLOR or Monochrome | Color : Three Separate Planes: R, G and B |
| Spectral Range | Visible |
| Image Sensor PhotoActive Width | 28.672 mm |
| Lens Mount | M52 Mount (F-Mount also available) |
| Pixel Formats | 24 bit (3 x 8) in CL base configuration 30 bit (3 x 10) in CL medium configuration |
| Trigger Input | Hirose12-pin: 4.0±2.0Vp-p TTL or Camera Link: LVDS (CC1) Possible to change Negative Logic or Positive Logic |
| Sync output (open termination) |
Camera Link LVAL, DVAL, EEN Hirose 12-pin XEEN (Negative logic) 4.0 Vp-p (no termination) |
| Exposure Control | Available for Shutter-select mode Adjustable range :10μs to 13.209ms Adjustment increments : 12.5ns(1 clk) |
| Digital Inputs/Outputs | GPIO in/out via 12-pin Hirose connector |
| Connectors | CameraLink: 110226-1A0PL (x2) Hirose 12-pin: HR10A-10R-12PB(71) |
| Power Input | DC +12V-10% to +24V + 10% Typical: 520mA (No-shutter/internal, lens cap on) Max.: 600mA (No-shutter/internal, at saturation level) |
| Power Consumption | 5.4 W |
| Dimensions (H x W x L) | 90 mm (H) x 90 mm (W) x 90 mm (D) (without connector and lens mount protrusion) |
| Mass | 830 g |
| Operating Temperature | -5°C to +45°C |
| Storage Temperature | -25°C to +60°C |
| Humidity | 20 – 80% non-condensing |
| Vibration | 10G (20 Hz to 200 Hz XYZ direction) |
| Shock | 80G |
| Mass | 85 g |
| Standards Compliance | CISPR Pub.22 (EN55022)(Emission), CISPR Pub.24(Immunity) IEC61000-4-2 Conforming to Level 4 (Note 1) FCC Part15 Class B, RoHS |
