daA1920-30uc (No-Mount)

SPECIFICATIONS

Model	daA1920-30uc (No-Mount)
Part Number	106689
Product Family	Basler dart
Interface	USB 3.0
Image Sensor	OnSemi MT9P031
COLOR or Monochrome	Color
Optics Format	1/3.7 inch
Lens Mount	None
Horizontal Pixels	1920
Vertical Pixels	1080
Total Pixels	2.07 MegaPixels
Frame Rate	30 Frames/sec
Electronic Shutter	Rolling Shutter
Pixel Size	2.20 um
Pixel Depth	8, 12 bits
Pixel Output Formats	Bayer 12 Bayer 8 RGB 8 YCbCr422_8 (YUV422_8)
Frame Synchronization	Hardware Trigger Free-Run Mode Software trigger
Exposure Control	Programmable via the camera API Hardware trigger
Digital Inputs	1
Digital Outputs	2
General Purpose I/O (GPIO)	2
Power Input	via USB 3.0 interface
Power Consumption	1.2 Watts
Dimensions	7.2 mm x 27 mm x 27 mm
Operating Temperature	0 to 50 C
Mass	5 g
Standards Compliance	CE, RoHS, GenICam, UL, USB3 Vision, FCC, KC

Chunks	Exposure Time Gain
Color Creation and Enhancement	Auto Function Profile: Anti-Flicker Backlight Compensation Balance White (Manual White Balance) Balance White Auto (Automatic White Balance) Brightness and Contrast Hue and Saturation
I/O Control	Debouncer
Image Acquisition Control	Acquisition Frame Rate Acquisition Mode Acquisition Start, Stop, and Abort Sensor Shutter Mode Triggered by Hardware Triggered by Software
Line Source Signals	Flash Window
Miscellaneous	Defect Pixel Correction Device Information Parameters User Sets (Configuration Sets)
PGI	Color-Anti-Aliasing Denoising Improved Sharpness
Pixel Formats	RGB 8 YCbCr422_8 (YUV422_8)
Standard Features	Auto Function Profile Binning Black Level Exposure Auto Exposure Mode: Timed Exposure Mode: Trigger Width Exposure Time Gain Gain Auto Gamma Correction Image ROI (Region of Interest) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Test Patterns

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.224 mm
	Vertical PhotoActive Area (PAA v)	2.376 mm
	Diagonal PhotoActive Area (PAA diag)	4.846 mm
	Image Sensor Resolution	227 line pairs/mm

Connector Locations

I/O Connector Pinout

I/O Connector	PIN	LABLE	FUNCTION
	1	–	3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin)
	2	–	Ground
	3	Line 1	General Purpose I/O (GPIO) line PRESET: INPUT LINE
	4	Line 2	General Purpose I/O (GPIO) line PRESET: INPUT LINE
	5	–	Not Connected
	6	–	Not Connected

DRAWING DOWNLOAD

Basler dart USB3 bare board MT9P v03

Basler Dart USB 3.0 Manual.pdf
Basler dart USB3 bare board MT9P v03