Coaxlink CXP-12 to QSFP+ Converter

Four-connection CoaXPress CXP-12 to CoaXPress-over-Fiber Converter

  • Provides easy cable length extension using CoaXPress-over-Fiber

  • Allows connecting a CXP-12 camera to a Coaxlink QSFP+ frame grabber

  • Four CoaXPress CXP-12 connections on the camera side

  • One QSFP+ port compliant with 40 Gbps optical modules on the frame grabber side

  • 5,000 MB/s camera bandwidth

  • PoCXP Camera Power Supply

SPECIFICATIONS

CAMERA/VIDEO INPUTS

Interface standard(s) CoaXPress 1.0, 1.1, 1.1.1 and 2.0, CoaXPress-over-Fiber Bridge Protocol 1.0
Connectors Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12
Status LEDs One CoaXPress Host connection status LED per connection
Number of cameras Area-scan cameras:

    • One 1- or 2- or 4-connection camera

Line-scan cameras:

    • One 1- or 2- or 4-connection camera
Maximum aggregated camera data transfer rate 50 Gbit/s (5,000 MB/s)
Supported CXP down-connection speeds 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5),

6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)
Supported CXP up-connection speeds
  • Low-speed 20.83… Mbps (CXP-1 to CXP-6)
  • Low-speed 41.66… Mbps (CXP-10, CXP-12)
Number of CXP data streams (per camera) 1 data stream per camera
Maximum CXP stream packet size 16,384 bytes
PoCXP (Power over CoaXPress) PoCXP Safe Power:

    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections

A +24V power source must be connected to the POWER IN connector

ELECTRICAL

Supply voltage 24 V DC (tolerance. TBD), via external power supply block (not included)
Power connector POWER IN connector: 2-pin 5.08 mm pluggable terminal block socket
Power consumption
  • 29 W for internal use (estimation TBC)
  • 4 x 17 W for PoCXP

MECHANICAL

Cooling Method Air cooling, fan-cooled heatsink
Housing Aluminum housing
Mounting Desktop
Connectors ‘A’, ‘B’, ‘C’, ‘D’ on front panel:

    • 4x Micro BNC female connectors
    • CoaXPress host interface

‘QSFP+’ on rear panel:

    • Enhanced Quad Small Form-factor Pluggable port
    • CoaXPress-over-Fiber device interface

‘POWER IN’ on rear panel:

    • 2-pin 5.08mm pitch terminal socket
    • 24 V DC power input for internal use and PoCXP
LED indicators ‘A’, ‘B’, ‘C’, ‘D’ on front panel:

    • Bi-color red/green LEDs
    • CoaXPress Host connector indicator

‘A’, ‘B’, ‘C’, ‘D’ on rear panel:

    • Bi-color red/green LEDs
    • CoaXPress Device connector indicator

‘FPGA OK’ on rear panel:

    • Bi-color red/green LED
    • FPGA status indicator

‘BOARD OK’ onrear panel:

    • Bi-color red/green LED
    • Board status indicator
Dimensions L 112 mm x H 55 mm x D 208 mm
Weight TBD g, TBD oz (3629)

ENVIRONMENTAL

Operating ambient air temperature 0 to +55 °C / +32 to +131 °F
Operating ambient air humidity 10 to 90% RH non-condensing
Storage ambient air temperature -20 to +70 °C/ -4 to +158 °F
Storage ambient air humidity 10% to 90% RH non-condensing

CERTIFICATIONS

Electromagnetic – EMC standards European Council EMC Directive 2004/108/EC (TBC)

United States FCC rule 47 CFR 15 (TBC)
EMC – Emission TBD
EMC – Immunity TBD
KC Certification TBD
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2015/863 (ROHS3)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations

CONTROLS

AREA-SCAN CAMERA CONTROL

Trigger
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.

LINE-SCAN CAMERA CONTROL

Scan/page trigger
  • Precise control of start-of-scan and end-of-scan triggers.
  • Support of external hardware trigger, with optional delay.
  • Support of infinite acquisition, without missing line, for web inspection applications.
Line trigger
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.
  • Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%.
  • Rate Divider tool
Line strobe
  • Accurate control of the strobe position for strobed light sources.

 

DOWNLOADS

COAXLINK QUAD CXP-12 DATASHEET
egrabber Offline Documentation (167 MB executable ZIP file installs to your start menu)
Updated Software for Wndows, Linux and macOS (link to Euresys Manufacturer Web Site)

 

Shopping Cart
Scroll to Top