acA3800-10gm

SPECIFICATIONS

Model	acA3800-10gm
Part Number	106702
Product Family	ace Classic
Interface	GigE Vision
Image Sensor	OnSemi MT9J003
COLOR or Monochrome	Monochrome
Optics Format	1/2.3 inch
Lens Mount	C-mount
Horizontal Pixels	3840
Vertical Pixels	2748
Total Pixels	10.552 MegaPixels
Frame Rate	10 Frames/sec
Electronic Shutter	Rolling
Pixel Size	1.67 um
Pixel Depth	12 bits
Frame Synchronization	Hardware Trigger Free-Run Mode Ethernet Connection
Exposure Control	Programmable via Camera API
Digital Inputs	1
Digital Outputs	1
Power Input	PoE or 12-24 VDC
Power Consumption	3.3 Watts
Power Consumption PoE	3.7 Watts
Dimensions	42 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	90 g
Standards Compliance	CE, RoHS, GenICam, GigE Vision, IP30, UL, FCC, IEEE 802.3af (PoE), KC

EMVA DATA

EMVA Peak Quantum Efficiency	46.0 %
Dark Noise	5.6 electrons
Saturation Capacity	2,800electrons
Dynamic Range	54.0 dB
Signal-to-Noise Ratio	34.4 dB

Chunks	CRC Checksum Exposure Time Frame Counter Line Status All Sequence Set Index Timestamp Trigger Input Counter
Event Reporting	Acquisition Start Acquisition Start Overtrigger Exposure End Frame Start Frame Start Overtrigger
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Flash Window Frame Trigger Wait Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8 YCbCr422_8 (YUV422_8)
Standard Features	Auto Function Profile Black Level Digital Shift Exposure Auto Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Scaling Horizontal Scaling Vertical Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	6.413 mm
	Vertical PhotoActive Area (PAA v)	4.589 mm
	Diagonal PhotoActive Area (PAA diag)	7.886 mm
	Image Sensor Resolution	299 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	12–24 VDC Camera Power
2	Line 1	Opto-coupled I/O input line
3	–	Not connected
4	Out 1	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for camera power