acA1920-25uc

SPECIFICATIONS

Model	acA1920-25uc
Part Number	106229
Product Family	ace Classic
Interface	USB 3.0
Image Sensor	OnSemi MT9P031
COLOR or Monochrome	Color
Optics Format	1/3.5 inch
Lens Mount	C-mount
Horizontal Pixels	1920
Vertical Pixels	1080
Total Pixels	2.074 MegaPixels
Frame Rate	26 Frames/sec
Electronic Shutter	Rolling
Pixel Size	2.2 um
Pixel Depth	12 bits
Frame Synchronization	Hardware Trigger Free-Run Mode Software trigger
Exposure Control	Programmable via Camera API Hardware Trigger
Digital Inputs	1
Digital Outputs	1
Power Input	Via USB 3.0 interface
Power Consumption	2.2 Watts
Dimensions	29.3 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	80 g
Standards Compliance	CE, RoHS, GenICam, IP30, UL, FCC, USB3 Vision, KC

EMVA DATA

EMVA Peak Quantum Efficiency	57.2%
Dark Noise	6.4 electrons
Saturation Capacity	6,700 electrons
Dynamic Range	60.3 dB
Signal-to-Noise Ratio	38.3 dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Color Creation and Enhancement	Balance White (Manual White Balance) Balance White Auto (Automatic White Balance) Color Adjustment (6-axis Hue/Saturation) Light Source Presets
Event Reporting	Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Flash Window Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
Pixel Formats	Bayer 12 Bayer 8 Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.224 mm
	Vertical PhotoActive Area (PAA v)	2.376 mm
	Diagonal PhotoActive Area (PAA diag)	4.846 mm
	Image Sensor Resolution	227 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN NUMBER	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) lines